Bedienungsanleitung Karcher Audio MC 6540BT (Seite 19 von 24) (Deutsch, Englisch)

652947

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

EN | 19

Snooze Function

The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the SNOOZE

button once while the alarm is active. The alarm will stop and come on again after 9 minutes. The

alarm icon will be ashing during this period. To turn off this function, press the respective ALARM

button (1 or 2).

Sleep Function (via Remote Control)

The sleep function enables you to set a countdown timer after which the unit will turn itself into standby

mode automatically.

• While listening, repeatedly press the SNOOZE button on the remote control to select a desired

countdown after which the radio will turn itself off automatically.

• You can select 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. “SLEEP” will be shown in the display.

• To check the remaining time on the countdown, press the SNOOZE button once.

• If you want to cancel the function, press the SNOOZE button repeatedly until “00” appears in the

display. “SLEEP” will disappear from the display.

Equalizer Presets

While listening, repeatedly press the EQ button to change the euqalizer preset. You can select be-

tween Flat, Rock, Classic, Pop, Jazz.

Radio

1. Switch the unit on as described previously.

2. Press the FUNCTION button repeatedly to select “RADIO”. The frequency will be shown in the

display.

3. Select a desired radio station by pressing the or button repeatedly.

4. To automatically search for the next available radio station, press and hold for 2 seconds the

or button.

5. If a station is broadcasting stereo, you can press the FM ST button for best sound. If a station is

bradcasting in mono, it is usually better to turn FM ST off.

6. For the best FM reception completely unroll the FM wire antenna.

Radio Station Presets

This unit enables you to store up to 20 radio stations.

1. Tune to a radio station which you would like to store.

2. Press and hold for 2 seconds the PRESET button. The presets will start ashing (e.g. “P01”).

3. Select a desired preset place from P01 - P20 on which you want to store the current frequency by

pressing the or button.

4. Press the PRESET button again to conrm your setting.

5. Repeat steps 1 - 4 to store up to 20 frequencies.

6. To recall a stored frequency, repeatedly press the PRESET button until you reach the desired

preset.

CD Operation

Playing Discs

1. Switch the unit on and select the CD mode by pressing the FUNCTION button.

2. Press the EJECT button to open the CD compartment.

3. Insert a disc with the printed side facing outward.

4. Press the EJECT button again to close the CD compartment.

5. The CD is being read and the total no. of tracks will be displayed.

6. Press the PLAY/PAUSE button to start the playback.

7. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. Press the but-

ton again to resume playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio MC 6540BT Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info