Bedienungsanleitung Karcher Audio RA2030D (Seite 28 von 32) (Deutsch, Englisch)

733571

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

28 | EN

3. Select a desired preset (1 - 20) on which you want to store the current station by pressing the

or button on the remote control.

4. Press the Prog button to conrm your setting. “Stored” will be shown in the display.

5. Repeat steps 1 - 4 to store up to 20 frequencies.

6. To recall a stored station press the Preset -/+ buttons on the unit or the Preset ▲/▼ buttons on

the remote control.

Automatically Store Radio Stations

Instead of storing stations manually, they can also be stored automatically:

1. Press the Scan button on the remote control.

2. The unit will start an automatic search and store found stations consecutively in the presets (up

to 20).

Once the search is complete the rst found station will be played.

3. To recall a stored station press the Preset -/+ buttons on the unit or the Preset ▲/▼ buttons on

the remote control.

Notes:

• To rene the auto-scan you can set the unit inside the FM menu to search only for stations with

strong signal and to “force mono“ (see section “FM Menu“).

• Stations that may have been stored manually previously will be overwritten.

RDS (Radio Data System)

This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-

dio station together with the audio broadcast. This text information can include name of the radio sta-

tion, name of the current program or song, news headlines, etc. and may vary from station to station.

To display different info contents, repeatedly press the Display or Menu/INFO button.

Notes:

• Not all radio stations transmit RDS information. In such cases the unit will not show any informa-

tion.

• RDS information broadcast may vary from station to station.

• If the radio signal is weak, transmission of RDS information may be disturbed or not shown

properly.

FM Menu

1. To enter the FM menu, press and hold the Stop/Menu/Info button on the remote control for 2

seconds.

2. Navigate the menu by pressing the / buttons on the remote control and enter submenus or

conrm selections by pressing the Play/Pause/Select button on the remote control.

Inside the menu there are the following options:

< Scan setting > < Audio setting > < SYSTEM >

Select whether the unit should scan

for all stations or only stations with

strong signal when automatically

tuning.

When “Forced mono” is selected, all sta-

tions will be broadcast in mono mode. In

areas with weak signal, the broadcast qual-

ity may be improved by this.

Same as in DAB+ menu.

USB

Playing MP3 les from USB

1. Insert a USB stick into the USB port on the unit.

2. Switch the unit on and select the USB mode by pressing the

Source button on the unit repeat-

edly or by pressing the USB button on the remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2030D Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info