Bedienungsanleitung Karcher Audio RA2030D (Seite 29 von 32) (Deutsch, Englisch)

733571

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

EN | 29

3. The USB is being read and the total number of albums and tracks will then be shown in the

display.

4. Press the Play/Pause/Select button on the remote control to start playback.

5. To temporarily stop the playback (pause), press the Play/Pause/Select button once. Press

the button again to resume playback.

6. To stop playback, press the Stop button.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the beginning of the currently playing track, press the Tuning button once. Press it

a second time to skip to the previous track.

• To skip to the next track, press the Tuning button once.

• To fast forward the currently playing track, press and hold the Tuning button. Once you reach

the desired section of the track, release the button to resume normal playback.

• To fast rewind the currently playing track, press and hold the Tuning button. Once you reach

the desired section of the track, release the button to resume normal playback.

• If the USB has several folders you can select those by pressing the Preset -/+ buttons.

Repeat Modes

At any time during playback press the Repeat button on the remote control repeatedly to select

between

• Repeat One - the current track will be repeated. The display will show “REP ONE”.

• Repeat Folder (if the USB contains folders) - the current folder will be repeated. The display will

show “REP FOLDER”.

• Repeat All - All tracks on the USB will be repeated. The display will show “REP ALL”.

• To turn off the repeat modes, press the Repeat button on the remote control repeatedly until

“Repeat Off” is shown.

Random Playback

• To play all tracks in random order, press the Random button on the remote control. The dis-

play will show “SHUFFLE ON”.

• To disable this feature, press the Random button once again.

Programming Track Order

You can store up to 20 tracks in a desired sequence.

1. While in stop mode, press the Prog button. “F01”, “T001” and “P01” will be ashing in the display.

2. Using the / buttons, select the track to be played rst in the sequence.

If the USB contains several albums (folders), select the album rst using the Album▲/▼ buttons

on the remote control (or the Preset -/+ buttons on the unit), followed by the track.

3. Press the Prog button again. “P02” will be shown in the display.

4. Repeat the steps 2 - 3 to select up to 20 tracks for your sequence.

5. Press the Play/Pause button to start the playback of your sequence.

6. To stop playback, press the Stop button. To delete your sequence press this button a second

time.

ID3-Tags

When the les on the inserted USB are equipped with ID3-Tags (artist, track and album names) you

can display them by repeatedly pressing the Display button.

Charging Function

You can charge a mobile phone or similar device through the unit’s USB port by simply connecting the

device to the USB port.

Notes:

• A USB device must always be connected directly to the USB port of this product. The use of a

USB extension cord is not supported by this product. The USB port of this product cannot com-

municate with a computer directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2030D Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info