Bedienungsanleitung Karcher Audio RA2060D (Seite 27 von 36) (Deutsch, Englisch)

733574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

EN | 27

automatically.

• The sleep timer can be set either in the system settings menu (System Settings > Sleep) or by

repeatedly pressing the SLEEP button on the remote control followed by pressing /OK to

conrm the setting.

• You can select between 15, 30, 45, 60, 90,120 or 150 minutes.

• When the sleep timer is activated the display will show a sleep timer symbol with the remaining

time at the bottom.

• To change or cancel the sleep function, you can do so either in the sleep menu by selecting

“Sleep Timer O” or by repeatedly pressing the SLEEP button on the remote control until “Sleep

Timer O” is shown and then pressing /OK.

Time/Date & Alarms

Time/Date

Time and date will be automatically synchronized through DAB+ signal.

That means that upon the initial installation of the unit, time and date will be set automatically do not

need to be set manually.

If you do wish to set time and date manually, you can do so inside the System Settings menu.

Alarms

This unit enables you to set 2 separate alarms. You can select to wake to buzzer, DAB or FM.

1. Enter the Alarm Settings either through the System Settings menu (System Settings > Alarm) or

by pressing the ALARM button on the remote control.

2. Select whether you want to edit alarm 1 or alarm 2 and press /OK.

3. You can now do the detailed settings (use the CONTROL knob on the unit or the arrow buttons

on the remote control to scroll through the items and /OK to view the options; press < or

to go back to the previous menu):

Alarm: Set the alarm On or O.

Frequency: Chose between Daily, Once, Weekends and Weekdays (Mo-Fr).

Wake Up Time: Set the desired wake up time.

Source: Select the alarm source (buzzer, Digital Radio or FM).

Preset: When one of the radio modes is set for mode, select which station should be played (this

setting is not available when buzzer is selected for mode).

Duration: Set the duration of the alarm.

Volume: Set the max. alarm volume. When the alarm comes on, the volume will increase up to

the set max. volume.

4. You can exit the alarm setting menu now by pressing < or . When you set the Alarm “On” it will

sound at the set time/day.

When the alarm is active the display will show an alarm symbol and the set alarm time.

Deactivating an Alarm

• To deactivate a set alarm, enter the alarm settings menu and set Enable to “O”. The alarm is not

active and will not sound.

Stopping an Active Alarm

• When the alarm is sounding, press the button on the remote control or press and hold the

/ MODE button on the unit to turn it o. The alarm will come on again on the next day at the set

time (depending on the set frequency).

Snooze

The snooze function allows you to delay an active alarm. To do so, press the /OK button on the

remote control repeatedly (or OK on the unit) while the alarm is active to set a snooze time of 5, 10,

15, 20, 25 or 30 minutes. The alarm will stop and come on again after the set time. While the snooze

function is active the alarm symbol is ashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2060D Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info