Bedienungsanleitung Karcher Audio RA2060D (Seite 29 von 36) (Deutsch, Englisch)

733574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

EN | 29

DAB+ Menu

To enter the Digital Radio menu, press the MENU button on the remote control once or press and hold

for 2 seconds the MENU button on the unit while in DAB+ radio mode.

Inside the menu you can select between the following menu items and functions by pressing the

buttons on the remote control or by rotating the CONTROL knob on the unit (to enter menu items

and to conrm a selection press on the remote control or OK on the unit; to exit menu items and the

menu press < or or MENU):

Station List View the station list.

Full Scan Do a full scan for available radio stations.

Manual Tune Manual tune the frequencies.

Prune Invalid

Yes - Deletes all invalid stations from the station list.

No - Cancel and return to the menu.

DRC

High

This function reduces the dierence between the loudest and quietest

audio being broadcast.

Eectively, this makes quiet sounds comparatively louder, and loud

sounds comparatively quieter.

Note: DRC only works if it is enabled by the broadcaster for a specic

station.

Low

O

System Settings Enters the System Settings menu. See chapter System Settings Menu.

FM Radio

1. Switch the unit on as described previously. It will start in the mode last listened to. Select FM

mode if it isn’t already selected.

2. Select a desired radio station by pressing the </> buttons on the remote control or the /

buttons on the unit. Each press adjusts the frequency by 0.05 MHz.

3. To automatically search for the next available radio station, press and hold for 2 seconds the </>

buttons on the remote control or the / buttons on the unit, or press the AUTO button on the

remote control.

Note:

• For the best possible reception fully unwind the FM wire antenna.

Presets

This unit enables you to store up to 30 of your favorite radio stations:

1. Select a radio station which you would like to store.

2. Press and hold for 2 seconds the MEM/PROG button on the remote control or on the unit to enter

the preset menu.

3. Select the preset no. on which the station should be stored using the

buttons on the remote

control or the CONTROL knob on the unit.

Alternatively you can store the current radio station directly on one of the presets from 1 to 5 by

pressing and holding for 2 seconds the according PRESET (1 - 5) button on the unit.

4. Conrm by pressing on the remote control or OK on the unit.

5. To recall a stored frequency, press the MEM/PROG button once to view the preset list, select the

desired station using the

buttons on the remote control or the CONTROL knob on the unit

and press on the remote control or OK on the unit to play that station.

Alternatively you can select the desired preset station directly by pressing the corresponding

PRESET (1 - 5) button on the remote control.

Note:

• Due to software limitations the preset list in FM mode will show the frequency, not the station

name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2060D Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info