Bedienungsanleitung Karcher Audio RA2060D (Seite 31 von 36) (Deutsch, Englisch)

733574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

EN | 31

CD Player

Playing Discs

1. Switch the unit on and select the CD mode.

2. Open the CD drawer by pressing the

Open/Close button on the remote control or on the unit.

Insert a disc with the printed side facing up.

3. Close the CD drawer. The CD is being read and playback starts automatically with the rst track.

4. To temporarily stop the playback (pause), press the

button once. Press the button again to

resume playback.

5. To stop playback, press the button.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the beginning of the currently playing track, press the button (or < on the remote

control) once. Press it a second time to skip to the previous track.

• To skip to the next track, press the button (or > on the remote control) once.

• To fast forward the currently playing track, press and hold the button (or > on the remote

control). Once you reach the desired section of the track, release the button to resume normal

playback.

• To fast rewind the currently playing track, press and hold the button (or < on the remote

control). Once you reach the desired section of the track, release the button to resume normal

playback.

Repeat / Random Modes

At any time during playback press the REP button on the remote control repeatedly to select between

• Repeat One - the current track will be repeated; the display will show .

• Repeat Album (if the CD or USB contains albums) - the current album will be repeated; the

display will show .

• Repeat All - All tracks on the CD or USB will be repeated; the display will show .

• Random Playback - All tracks will be played in random order; the display will show .

Note:

• To disable the Random and Repeat function, press the REP button repeatedly, until all Repeat/

Random symbols disappear from the display.

Intro Mode

• To play only the rst 10 seconds of each song, press the INTRO button on the remote control.

“INTR” will be shown in the display.

• To turn o intro mode and switch back to regular playback, press again the INTRO button.

Programming Track Order

You can store up to 20 tracks (up to 99 tracks for MP3 discs and USB) in a desired sequence.

1. While in CD stop mode, press and hold for 2 seconds the MEM/PROG button. “P01” and “T01”

will be ashing in the display.

2. Using the </> buttons on the remote control (or / on the unit), select the track to be played

rst in the sequence.

If the disc contains several albums, select the album rst using the FOLD-/FOLD+ buttons on the

remote control, followed by the track.

3. Press the MEM/PROG button again. “P02” will be ashing in the display.

4. Repeat steps 2 - 3 to select up to 20 tracks for your sequence.

5. Press the button to start the playback of your sequence.

6. To stop playback and delete your sequence, press the button.

ID3-Tags

When the les on the inserted disc are equipped with ID3-Tags (artist, track and album names) you

can display them by repeatedly pressing the INFO button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2060D Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info