Bedienungsanleitung Karcher Audio UR1309D (Seite 22 von 28) (Deutsch, Englisch)

733569

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

22 | EN

Alarm

Alarm Setting

An alarm can only be set while the unit is in standby mode.

This unit enables you to set 2 separate alarms. You can select to wake to DAB, FM, CD, USB or

buzzer.

1. While the unit is in standby mode, press the ALARM button to enter the alarm setting.

2. Select to set Alarm 1 or Alarm 2 using the TUNE / buttons and press the ALARM button

again.

3. Select to set alarm ON or OFF using the TUNE / buttons and press the ALARM button

again. The hour will be ashing.

4. Set the desired hour by pressing the TUNE / buttons.

5. Press the ALARM button again. The minutes will start ashing.

6. Set the desired minutes by pressing the TUNE / buttons.

7. Press the ALARM button again to select the wake up mode.

8. Select between DAB, FM, CD, USB or buzzer by pressing the TUNE / buttons.

9. Press the ALARM button again to set the max. alarm volume by pressing the TUNE / but-

tons (the alarm will start from low volume up to the set max. volume).

10. Press the ALARM button again. The alarm is now set and will come on at the set time.

Deactivating an Alarm

1. To deactivate a set alarm, press the ALARM button while the unit is in standby mode.

2. Select the alarm to be disabled using the TUNE / buttons and press the ALARM button.

3. Select “OFF” using the TUNE / buttons followed by the ALARM button once again

4. The alarm will be disabled and the alarm symbol will disappear from the display.

Stopping an Active Alarm

• When the alarm is sounding, press the STANDBY button to turn it o. The alarm will come on

again on the next day at the set time.

Snooze Function

The snooze function allows you to delay an active alarm for approximately 9 minutes. To do so, press

the SNOOZE button once while the alarm is active. The alarm will stop and come on again after ap-

proximately 9 minutes. During this time the alarm icon is ashing in the display.

To cancel the snooze function, press the STANDBY button.

DAB+ Radio

1. Switch the unit on as described previously.

2. Select the DAB+ radio mode by pressing the SOURCE button on the unit repeatedly.

When the unit is switched into DAB mode for the rst time, it will automatically tune for available

stations.

You can also do a full scan by pressing the SCAN button.

3. Select a desired radio station by pressing the TUNE or button repeatedly.

Radio Station Presets

This unit enables you to store up to 20 radio stations.

1. Tune to a radio station which you would like to store.

2. Press and hold for 2 seconds the PROG button. The presets will start ashing (e.g. “1”).

3. Select a desired preset place from 1 - 20 on which you want to store the current frequency by

pressing the TUNE or button.

4. Press the SELECT button to conrm your setting.

5. Repeat steps 1 - 4 to store up to 20 frequencies.

6. To recall a stored frequency, press the PROG button once and then select the desired preset by

pressing the TUNE

or button. Then press SELECT to play that preset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio UR1309D Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info