Bedienungsanleitung Karcher B60 (Seite 19 von 300) (Alle Sprachen)

804747

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

- 6

DANGER

Risk of injury! When loading or unloading

the machine, it may only be operated on

gradients up to the maximum value (see

"Technical Specifications"). Drive slowly.

몇CAUTION

Risk of personal injury or damage! Mind the

weight of the appliance during transport.

Raise the cleaning head to avoid dam-

age to the brushes.

Remove the brush to avoid damage to

the brushes.

When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

몇CAUTION

Risk of personal injury or damage! Consid-

er the weight of the appliance when storing

it.

This appliance must only be stored in inte-

rior rooms.

DANGER

Risk of injury! Before working on the appli-

ance, remove the Intelligent Key and the

mains plug of the charger.

Drain and dispose of the dirt water and

the residual fresh water.

Recommended cleaning processes are

shown on the display at certain cleaning in-

tervals.

Perform the maintenance task shown

on the display.

Press the Info Button, the display will be

reset. The display will be shown again

at certain predefined time intervals.

Note: A service reset resets all mainte-

nance intervals.

ATTENTION

Risk of damage. Do not sluice the appli-

ance with water and do not use aggressive

detergents.

Drain off dirt water.

Rinse the waste water tank with clean

water or with the rinsing system for the

waste water tank (option).

Remove the coarse dirt sieve from the

waste water tank and clean it.

Clean the outside of the appliance with

a damp cloth which has been soaked in

mild detergent.

Clean protective turbine strainer.

Only BR model: Remove bulk waste

container and empty it.

Only BR model: Clean water distributor

channel (see section „Maintenance

work“).

Clean the vacuum lips and the wiping

lips, check for wear and replace if re-

quired.

Check the brushes for wear, replace if

required.

Press the lock of the waste water tank

in and close the cover of the waste wa-

ter tank so that a gap remains open to

facilitate drying.

Charge the battery:

If the charging state of the battery is un-

der 50%, charge the battery fully and

without interruption.

If the charging state of the battery is

over 50%, only recharge the battery if

the entire operation duration will be re-

quired when next used.

When used regularly, charge the bat-

tery fully and without interruption at

least once a week.

Check battery poles for oxidation, brush

off if necessary. Ensure that the con-

nection cable sits firmly.

Clean the seals between waste water

tank and cover and check for tightness,

replace if required.

Check the acid density of the cells if the

batteries are not maintenance-free bat-

teries.

Clean the brush tunnel (only BR mod-

el).

For long periods of disuse, only turn the

device off when the battery is fully

charged. Fully recharge the battery at

least every month.

Have the prescribed inspection carried

out by the customer service.

Open the cover of the waste water tank.

Squeeze the locking hooks.

Pull off the float.

Turn the protective turbine strainer in a

counter-clockwise direction.

Remove protective turbine strainer.

Rinse dirt off the protective turbine

strainer with water.

Reattach protective turbine strainer.

Attach float.

Drain the wastewater, see section

"Drain wastewater“.

Open the cover of the waste water tank.

Pull the flexible lock off of the rinsing

system.

Connect the water hose to the rinsing

system.

Close the cover of the wastewater res-

ervoir until it rests on the flexible lock.

Open the water supply and rinse the

wastewater reservoir for about 30 sec-

onds.

Repeat the rinsing process 2 to 3 times.

Shut off the water supply and discon-

nect the hose from the appliance.

Reattach the flexible lock to the connec-

tion. Leave the wastewater reservoir

cover open a crack to let it dry.

Transport

Storage

Care and maintenance

Maintenance schedule

Maintenance intervals

Display Display all

Clean the vacuum bar 20 hours

Clean the fluff filter 20 hours

Clean water filter. 50 hours

Check the suction lips 100 hours

Check the brushes 100 hours

Service reset 200 hours

After each operation

Weekly

Monthly

Yearly

Maintenance Works

Cleaning the protective turbine strainer

Waste water tank rinsing system

(option)

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher B60 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info