Bedienungsanleitung Karcher BR 30-1 C Bp (Seite 18 von 224) (Alle Sprachen)

804745

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

18 English

2. Bring the device into the parking position (see chap-

ter General notes on operation).

3. Empty the waste water tank (see chapter Emptying

the waste water tank).

4. Pull the lid handle and remove the lid.

Illustration T

5. Clean the waste water bowl and the lid with tap wa-

ter.

Illustration U

6. Allow the waste water bowl and the lid to dry or dry

them with a lint-free cloth.

7. Assemble the waste water tank in reverse order and

insert it into the device.

Cleaning the sweep bins

ATTENTION

Adhering dirt deposits

Adhering dirt deposits can damage the device in the

long term.

It is recommended to clean the device after each appli-

cation.

Clean the sweep bins regularly.

1. Press the ON/OFF switch.

Illustration L

The device switches off.

2. Bring the device into the parking position (see chap-

ter General notes on operation).

3. Remove the waste water tank (see chapter Empty-

ing the waste water tank).

4. Remove the sweep bins.

a Disengage the sweep bins to the side and swing

them forward.

b Remove the sweep bins to the side.

Illustration V

5. Clean both sweep bins under running water.

Illustration W

6. Remove the cleaning brush from the cover of the

waste water tank, and remove any dirt stuck in the

combs (shown with a frame).

7. Install the two sweep bins in the reverse order.

Cleaning the cleaning roller

ATTENTION

Detergent residues in the cleaning rollers

Foaming

Wash the cleaning rollers under running water or wash

the cleaning rollers in the washing machine each time

after use.

ATTENTION

Damage caused by washing the cleaning rollers

with fabric softener or using a tumble dryer

Damage to the microfibres

Do not use fabric softener when washing the cleaning

rollers in the washing machine.

Do not dry the cleaning rollers in a clothes dryer.

Do not bleach or iron the cleaning rollers.

1. Press the ON/OFF switch.

Illustration L

The device switches off.

2. Bring the device into the parking position (see chap-

ter General notes on operation).

3. Reach into the recessed grips on the side of the

cleaning rollers and unscrew the cleaning rollers.

Illustration X

4. Clean the cleaning rollers under running water or

wash them in the washing machine at max. 60°C.

Illustration Y

5. Clean the roller drives with a moist cloth.

6. Turn the cleaning rollers on the roller drives. Pay at-

tention to the colour assignment of the inside of the

roller and the roller drive (green to green and blue to

blue).

Illustration Z

7. Allow the rollers to dry mounted on the device or

standing vertically.

Cleaning the water distribution strips

ATTENTION

Adhering dirt deposits

Adhering dirt deposits can damage the device in the

long term.

It is recommended to clean the device after each appli-

cation.

Clean the water distribution strips regularly.

1. Press the ON/OFF switch.

Illustration L

The device switches off.

2. Bring the device into the parking position (see chap-

ter General notes on operation).

3. Remove the waste water tank (see chapter Empty-

ing the waste water tank).

4. Remove the cleaning rollers (see chapter Cleaning

the cleaning roller).

5. Remove the covers on the water distribution strips.

Illustration AA

Installation information

Note the side markings on the covers and on the device

(L to L and R to R).

6. Clean the covers under running water.

7. Clean both water distribution strips (shown with a

frame) with a damp cloth.

Illustration AB

8. Check the fresh water inlet openings (arrows) for

contamination; if necessary, remove stubborn dirt

with the cleaning brush.

9. Assemble in the reverse order.

Troubleshooting guide

Malfunctions often have simple causes that you can

remedy yourself using the following overview. When in

doubt, or in the case of malfunctions not mentioned

here, please contact your authorised Customer Service.

The cleaning rollers do not turn and the warning

light lights up

The safety switch-off of the drive motor has triggered,

e.g. B. by excessive pressure on the cleaning rollers or

by driving against a wall or corner.

Press the ON/OFF switch twice.

Only move the device back and forth when cleaning,

do not exert any pressure on the device.

The cleaning rollers are blocked.

Check whether an object is jammed on the cleaning

rollers. Remove the jammed object.

Check whether dirt has accumulated in the sweep

bins and remove it (see chapter Cleaning the

sweep bins).

Check that the sweep bins are fitted correctly. For

this, remove the sweep bins and then fit them back

in place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher BR 30-1 C Bp Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info