Bedienungsanleitung Karcher FC 7 Cordless Premium (Seite 19 von 252) (Alle Sprachen)

803420

Zoom out

Zoom in

Vorherige Seite

1/252

Nächste Seite

English 19

Completely empty the fresh water tank and waste water

tank before storing the device.

Use the cleaning brush to remove hair and dirt particles

from the hair filters in the floor head cover.

Allow the cleaned rollers to dry in the air, e.g. mounted

in the device on the parking station. Do not place the wet

rollers in an enclosed cupboard to dry.

1. Put the empty waste water tank in the cleaning sta-

tion to dry.

a Place the device on the parking station and let it

snap into place.

b Then place the device with the parking station on

the cleaning station.

Illustration AC

2. Fit the cleaned rollers on the device for drying.

Illustration AD

3. Charge the battery (see Chapter Charging pro-

cess).

4. Store the device in a dry room.

Illustration AF

Care and service

Floor head cleaning by means of rinsing

process

ATTENTION

Dirt or detergent residues

The waste water tank and the hair filters must be

cleaned regularly to ensure that dirt does not accumu-

late in the tank and hair filters. Dirt particles can clog the

hair filters and slots if the device is not cleaned after use.

The accumulation of dirt and bacteria can also result in

the development of unpleasant odours in the device.

On completion of work, place the device in the cleaning

station and start the rinsing process.

Clean the floor head in the cleaning station only by us-

ing the automatic rinsing process and not by pouring

water into the station separately. Make sure that the

waste water tank is attached.

Do not clean the device or the top or bottom of the floor

head under running water or under a shower spray, oth-

erwise water may enter.

Note

The rinsing process cannot be started while the "MAX"

indicator (red) is lit and the waste water tank has not

been emptied.

Note

The LED lighting on the floor head remains switched off

during the rinsing process.

1. Press the ON/OFF switch.

The device switches off.

2. Empty the waste water tank and reinsert it (see

chapter Emptying the waste water tank).

3. Place the device with an empty waste water tank in

the parking station.

4. Fill the fresh water tank with at least 200 ml of fresh

water without a detergent or care agent (see chapter

Filling the fresh water tank).

Illustration P

Note

It is not necessary to add detergent for the rinsing pro-

cess.

5. Hold the ON/OFF switch and the cleaning level ad-

justment button simultaneously pressed for

3 seconds.

An acoustic signal sounds.

Illustration Q

6. The indicators light up repeatedly from top to bot-

tom.

The rinsing process starts and takes approx. 2 min-

utes.

Illustration R

Note

At the start of the rinsing process, the water runs from

the fresh water tank onto the rollers for approx. 80 sec-

onds. During this time the device is silent. Only at the

end of the rinsing process do the rollers start to turn for

approx. 30 seconds.

7. When the rinsing process is finished, a signal tone

sounds and the (red) “MAX” display lights up.

Illustration S

8. Press the unlocking button for the waste water tank

and place the device on the parking station. The

waste water tank remains in the cleaning station.

Note

The (red) "MAX" display flashes for 10 seconds if an at-

tempt is made to switch the device on again with a full

waste water tank.

Cleaning work cannot be continued.

9. Press the unlocking button for the hair filters in-

wards.

The hair filters are released.

10. Place the hair filters in the cleaning station.

Illustration U

11. Remove the rollers and place them in the cleaning

station.

Illustration V

12. Transport the cleaning station with waste water

tank, hair filters and rollers to the toilet, sink or waste

container as required.

Illustration W

13. Clean the waste water tank (see chapter Cleaning

the waste water tank).

14. Clean the rollers (see chapter Cleaning the rollers).

15. Clean the hair filters (see chapter Cleaning the hair

filters).

16. Clean the underside of the floor head and the roller

drive with a moist cloth.

Illustration AB

Note

Do not clean the device or the top or bottom of the floor

head under running water or under a shower spray, oth-

erwise water may enter.

17. Empty and dry the cleaning station.

18. If water is still present in the fresh water tank, re-

move and drain the fresh water tank.

Cleaning the waste water tank

ATTENTION

Adhering dirt deposits

Adhering dirt deposits can damage the device in the

long term.

Clean the waste water tank regularly.

For information on the waste water tank indicator and

the procedure for cleaning the waste water tank, see

Chapter Emptying the waste water tank.

1. Remove the waste water tank cap.

Illustration X

2. Clean the waste water tank and cap with tap water.

3. Alternatively, the waste water tank can be cleaned in

a dishwasher.

Note

The rubber inlays of the waste water tank flap can be-

come sticky when cleaned in a dishwasher. This does

not affect their sealing ability.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher FC 7 Cordless Premium Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info