Bedienungsanleitung Karcher HDS 1000 BE (Seite 22 von 428) (Alle Sprachen)

726230

Zoom out

Zoom in

Vorherige Seite

1/428

Nächste Seite

– 3

Quality requirements for water:

ATTENTION

Only clean water may be used as high

pressure medium. Impurities will lead to in-

creased wear and tear or formation of de-

posits in the appliance and accessories.

If recycled water is used, the following limit

values must not be exceeded.

 DANGER

– Do not use high pressure cleaners

when there has been an oil spill; move

the appliance to another spot and avoid

any sort of spark formation.

– Do not store, spill or use fuel in the vi-

cinity of open flames or appliances such

as ovens, boilers, water heaters, etc.

that have an ignition flame or can gen-

erate sparks.

– Keep even mildly inflammable objects

and materials away from the silencer (at

least 2 m).

– Do not start the engine without the si-

lencer; check, clean and replace, if re-

quired, the silencer at regular intervals.

– Do not use the engine in forest, bushes

or grassy areas without fitting a spark

receiver at the exhaust.

– Except for setting jobs, do not run the

engine when the air filter is removed or

there is no cover over the suction sup-

port.

– Do not make any adjustments to the

regulator springs, regulator bars or oth-

er parts that can bring forth an increase

in the engine speed.

– Risk of burns! Do not touch hot silenc-

ers, cylinders or radiator ribs.

– Do not put hands or feet close to mov-

ing or rotating parts.

– Risk of poisoning! The appliance should

not be operated in closed rooms.

– Please follow the national rules and

regulations for fluid spray jets of the re-

spective country.

– Please follow the national rules and

regulations for accident prevention of

the respective country. Fluid spray jets

must be tested regularly and the results

of these tests must be documented in

writing.

– The heating appliance of the machine is

an ignition plant. All national laws and

regulations about heating systems must

also be followed.

– The appliance/accessories must not be

modified.

 DANGER

Risk of injury!

– Only use original high-pressure hoses.

– The high-pressure hose and the injec-

tion system must be suitable for the

maximum operating pressure given in

the Technical Data.

– Avoid contact with chemicals.

pH value 6,5...9,5

electrical conductivity * Conductivity

fresh water

+1200 µS/cm

settleable solids ** < 0,5 mg/l

total suspended solids *** < 50 mg/l

Hydrocarbons < 20 mg/l

Chloride < 300 mg/l

Sulphate < 240 mg/l

Calcium < 200 mg/l

Total hardness < 28 °dH

< 50 °TH

< 500 ppm (mg

CaCO

/l)

Iron < 0,5 mg/l

Manganese < 0,05 mg/l

Copper < 2 mg/l

Active chloride < 0,3 mg/l

free of bad odours

* Maximum total 2000 µS/cm

** Test volume 1 l, settling time 30 min

*** no abrasive substances

Safety instructions

General notes on safety

High pressure hose

22 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HDS 1000 BE Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info