Bedienungsanleitung Karcher HDS 13-35 De Tr1 (Seite 26 von 512) (Alle Sprachen)

726237

Zoom out

Zoom in

Vorherige Seite

1/512

Nächste Seite

- 6

몇CAUTION

Risk of injury and damage! Note the weight

of the appliance in case of storage.

몇CAUTION

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

ATTENTION

Protect the trigger from damage during

transport.

Note: The driver operating the towing vehi-

cle with trailer on public roads must ensure

that he or she has the appropriate license

(driver license class) for this.

DANGER

When transporting the trailer in public traffic

with the water tank half full, the water can

swap out or the trailer could even tilt during

extreme steering manoeuvres.

Completely fill or empty the water tank.

Do not transport with the water tank half

full.

Close front and rear cover.

Adjust the height of the drawbar by

means of the support wheel to the

height of the trailer hitch of the towing

vehicle.

Attach the tear-off rope to the towing

vehicle.

A Trailer hitch opened

B Trailer hitch closed

Hitching the towing vehicle: Pull the

coupling lever up (open), place the

drawbar on the ball, push down the cou-

pling lever (close) until it is horizontal to

the drawbar.

Connect the connector of the vehicle

lighting.

Rotate the support wheel up by means

of the crank.

Make sure that the suppport wheel

points in the direction of the trailer when

retracted.

Remove the chocks from underneath

the wheels and place them in their hold-

ers.

Release parking brake.

Check the brake lights, direction indica-

tors, tail lights, and the license plate

lighting for proper function.

Check tyre contact face for foreign ob-

jects.

Check the condition of the tyres.

Check the tyre pressure, see mainte-

nance tasks.

Note: Local speed limits for vehicles with

trailers must be observed and adhered to.

DANGER

Risk of injury due to machine dropping.

–Adhere to the local accident prevention

guidelines and safety notes.

–Check the lifting unit for damage prior to

each transport by crane.

–The device must only be lifted on the

lifting eye.

–Protect the lifting device from inadvert-

ent load release.

–Do not transport any articles on the ap-

pliance during the lifting process.

–The appliance must only be transported

by properly trained crane personnel.

–Do not stand below the load.

–Ensure that no persons are present in

the immediate vicinity of the crane.

–Do not leave the appliance on the crane

unattended.

몇WARNING

Risk of injury! Appliance, accessories, sup-

ply lines and connections must be in fault-

free condition. If they are not in a perfect

state then the appliance must not be used.

ATTENTION

Always keep the installation site of the sys-

tem well ventilated to protect the machine

against over-heating.

ATTENTION

Risk of malfunctions and damages to the

appliance. The appliance must be in hori-

zontal position during operation.

– Choose the installation site in a way

that the exhaust gas opening is not cov-

ered.

Lock parking brake.

Lower the support wheel by means of

the crank.

Remove the tear-off rope from the tow-

ing vehicle.

Disconnect the connector from the ve-

hicle lighting and insert it into the plug

storage on the drawbar.

Secure the machine with wheel chocks

to prevent it from rolling away.

Disconnect the towing vehicle.

Align the appliance horizontally with the

support wheel.

Actuate front cover lock. Front cover

opens slightly.

Release the hook catch by pulling it out.

The front cover is swung up automati-

cally.

When closing, make sure the hook catch

engages.

Check oil level of the engine.

Do not operate the appliance if the oil level

has fallen below "MIN".

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the oil level at the oil-level gauge

of the intermediate gear.

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the oil level on the oil tank or the

oil dipstick of the high-pressure pump.

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the fill level of the coolant in the

equalisation container of the motor

coolant with a cooled off motor. The liq-

uid level has to be between MIN and

MAX.

Refill coolant if necessary.

(see Chapter Care and Maintenance)

Check the antifreeze concentration in

the expansion tank.

If required refill antifreeze.

(see Chapter Care and Maintenance)

Check air filter.

Clean/replace the air filter if necessary.

(see Chapter Care and Maintenance)

– The liquid softener highly effectively

prevents the calcification of the heating

coil during operation with hard tap wa-

ter. It is dosed into the supply in the float

container drop by drop.

– The metering is set to medium water ri-

gidity by the manufacturer

Note: A sample bundle of liquid softener is

included in the delivery.

Open filling hole for liquid softener.

Refill liquid softener.

Close filling hole for liquid softener.

Storage

Transport

Trailer operation

Transport by crane

Safety instructions for transport by

crane

Start up

Install the device and align it

Open/close front cover

Motor

Intermediate gear

High-pressure pump

Coolant

Air filter

Refill liquid softener

26 EN

Karcher HDS 13-35 De Tr1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info