Bedienungsanleitung Karcher K 4.20 M + T 200 (Seite 13 von 176) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78138

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

English 13

Danger

Turn off the appliance and remove the mains

plug prior to any care and maintenance work.

The appliance is maintenance-free.

Prior to longer periods of storage, e.g. in the

winter:

Î Completely drain all water from the appli-

ance: Switch the appliance on with de-

tached high-pressure hose and detached

water supply (max. 1 minute) and wait,

until no more water exits at the high-pres-

sure connection. Turn off the appliance.

Î Remove filter from suction hose for deter-

gent and clean under running water.

Î Pull out the sieve in the water connection

using flat-nose pliers and clean under run-

ning water.

Caution

Protect the appliance and its accessories

against frost.

The appliance and its accessories can get de-

stroyed through frost if there are any water

residues in them. To avoid damage to them:

Î Store the appliance and the entire acces-

sories in a frost-safe room.

Use only original Kärcher spare parts. You will

find a list of spare parts at the end of these op-

erating instructions.

You can rectify minor faults yourself with the

help of the following overview.

If in doubt, please consult the authorized cus-

tomer service.

ƽ Danger

Turn off the appliance and remove the mains

plug prior to any care and maintenance work.

Repair works may only be performed by the

authorized customer service.

Î Check whether the voltage indicated on

the type plate corresponds to the voltage

of the mains supply.

Î Check the mains connection cable for

damages.

Î Check setting at the spray lance.

Î Appliance ventilation: Switch the appli-

ance on with the high-pressure hose de-

tached and operate until the water exits

the high-pressure connection without bub-

bles. Switch off appliance and reconnect

high-pressure hose.

Î Check the water supply.

Î Pull out the sieve in the water connection

using flat-nose pliers and clean under run-

ning water.

Cause: Voltage reduction due to weak mains

supply or when using an extension cable.

Î When switching on, first pull the lever of

the trigger gun and then switch the appli-

ance switch to "I/ON".

Î Clean high-pressure nozzle: Remove dirt

and debris from the nozzle bore, using a

needle and rinse through with water to-

wards the front.

Î Check water flow quantity.

Î Slight leakage from the appliance pump is

normal. If the leakage increases contact

the authorized customer service.

Î Use spray lance with pressure regulation

(Vario Power).

Turn the spray lance to "Mix" position.

Î Clean filter at the detergent suction hose.

Î Check the detergent suction hose for

kinks.

Maintenance and care

Maintenance

Storage

Frost protection

Spare parts

Troubleshooting

Appliance is not running

Pressure does not build up in the appli-

ance

Appliance does not start, motor hums

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 4.20 M + T 200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info