Bedienungsanleitung Karcher NT 30-1 Tact Te M (Seite 15 von 184) (Alle Sprachen)

804516

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

English 15

Closing the suction connection

1. Fit a plug exactly into the suction connection.

Illustration F

2. Push the plugs in until they engage.

Removing the fleece filter bag

●The fleece filter bag must always be removed when

vacuuming wet substances.

1. Unlock and remove the suction head.

2. Pull the fleece filter bag on the flange up and out.

Illustration G

3. Seal the fleece filter bag with cap.

4. Dispose of the used fleece filter bag in accordance

with statutory regulations.

5. Fit and lock the suction head.

Removing the dust bag

●The dust bag must always be removed when vacu-

uming wet substances.

1. Unlock and remove the suction head.

2. Fold up the dust bag.

Illustration H

3. Take off the protective film and close the ventilation

hole with a self-adhesive tab.

4. Seal the dust bag tightly underneath the opening us-

ing cable ties.

5. Remove the dust bag.

6. Clean the container inside with a moist cloth.

7. Dispose of the dust bag in accordance with statutory

regulations.

8. Fit and lock the suction head.

Draining the waste water

NT 50/1 only:

1. Drain the waste water via the drain hose.

Illustration I

General

●We recommend switching off the "Automatic filter

dedusting" function when vacuuming wet dirt with

the crevice nozzle or the upholstery nozzle (option-

al), or when sucking mainly water out of a container.

●The device switches off automatically when the

maximum fluid level is reached.

●When vacuuming non-conductive liquids (e.g. drill

emulsion, oils and grease) the device does not au-

tomatically switch off when the container is full. The

filling level must be continuously monitored and the

container emptied on a timely basis.

●On completion of wet vacuum cleaning: Clean the

main filter element using the filter cleaning. Clean

the electrodes with a brush. Clean the container with

a moist cloth and dry it off.

Clip connection

The suction hose is equipped with a clip system. All ac-

cessory parts with a nominal width of 35 mm can be

connected.

Illustration J

Operation

Turn switch

Switching on the device

1. Connect the mains plug.

2. Set the turn switch to the desired program.

Working with power tools

DANGER

Danger of electric shock

Risk of injury and damage.

The socket is only intended for direct connection of pow-

er tools to the vacuum cleaner. Any other use of the

socket is prohibited.

1. Plug the mains plug of the power tool into the power

socket on the vacuum cleaner. The vacuum cleaner

is in Standby mode.

2. Switch on the device at the turn switch.

Note

The vacuum cleaner is automatically switched on and

off with the power tool.

Note

The vacuum cleaner has a startup delay of up to 0.5

seconds and an after-running time of up to 15 seconds.

Note

See the Technical data for the permissible power rating

of the power tool.

3. Remove the angle piece from the suction hose.

Illustration K

4. Install the tool adapter on the suction hose.

5. Connect the tool adapter to the power tool.

Illustration L

6. Set the minimum volume flow on the turn switch for

suction hose cross section. The scale shows the

suction hose suction hose cross section.

Note

The different suction hose cross sections are necessary

in order to adapt to the different connection cross sec-

tions of the processing machines.

Note

For operation as a dust removal device for mobile oper-

ation (processing machine plugged into the vacuum

cleaner) the integrated monitoring system must be ad-

justed to suit the connected processing machine (dust

generator). This means that the user must be warned

when the flow rate drops below the minimum value 20

m/s needed for correct vacuuming.

Device OFF

●Device ON

●Automatic filter dedusting: OFF

●Adjust the suction performance (min-

max)

●Device ON

●Automatic filter dedusting: ON

●Adjust the suction performance (min-

max) (eco = energy-saving mode)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 30-1 Tact Te M Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info