Bedienungsanleitung Karcher NT 30-1 Tact Te M (Seite 17 von 184) (Alle Sprachen)

804516

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

English 17

Changing the dust bag

1. Close the suction connection, see wet vacuum

cleaning.

Illustration F

2. Unlock and remove the suction head.

3. Fold up the dust bag.

Illustration H

4. Take off the protective film and close the ventilation

hole with a self-adhesive tab.

5. Seal the dust bag tightly underneath the opening us-

ing cable ties.

6. Remove the dust bag.

7. Clean the container inside with a moist cloth.

8. Dispose of the dust bag in accordance with statutory

regulations.

9. Fit the new dust bag.

Illustration D

10. Pull the dust bag over the container. Ensure that the

marking line is within the container and the ventila-

tion hole is positioned on the back wall of the con-

tainer.

11. Fit and lock the suction head.

Cleaning/replacing the cooling air filter

1. Allow the appliance to cool down.

2. Unlock the cooling air flaps with a screwdriver and

fold them out.

Illustration Q

3. Clean (vacuum, wash) or replace the cooling air fil-

ter.

4. Fold the cooling air flaps in and latch it into place.

Cleaning the electrodes

1. Unlock and remove the suction head.

2. Clean the electrodes with a brush.

3. Fit and lock the suction head.

Troubleshooting guide

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

Note

The device must be switched off immediately if a mal-

function occurs (e.g. filter breakage). The malfunction

must be eliminated before switching the device on

again.

Suction turbine does not start up

1. Check the socket and the power supply fuse.

2. Check the mains cable, mains plug, electrodes and

power socket on the device.

3. Switch on the device.

Suction turbine switches off

1. Empty the container.

2. Insert the main filter element.

Suction turbine does not switch on again after emp-

tying the container

1. Switch off the device and wait for 5 seconds. Switch

on the device.

2. Clean the electrodes with a brush.

Suction power decreases

1. Remove any blockages from the suction nozzle,

suction pipe, suction hose or main filter element.

2. Change the filled fleece filter bag.

3. Dispose of the filled dust bag.

4. Correctly engage the filter cover.

5. Change the main filter element.

6. NT 50/1 only: Check the drain hose for leaks.

Escaping dust when vacuuming

1. Only with flat fold filters: Check that the flat fold filter

is correctly fitted and correct if necessary.

Illustration R

2. Change the main filter element.

The automatic switch-off mechanism (wet vacuum

cleaning) does not trigger

1. Clean the electrodes with a brush.

2. Continuously monitor the filling level when vacuum-

ing non-conductive liquids.

Horn sounds - intermittent tone

1. Set the turn switch to the correct hose cross-section.

2. The fleece filter bag must be replaced when it is full

and the air flow drops below the specified minimum

flow rate.

3. The dust bag must be replaced when it is full and the

air flow drops below the specified minimum flow

rate.

4. Change the main filter element.

Horn sounds - continuous tone

1. Allow the device to cool down. Clean/replace the

cooling air filter.

Automatic filter dedusting not working

1. Suction hose not connected.

The automatic filter dedusting function cannot be

switched off

1. Contact Customer Service.

The automatic filter dedusting function cannot be

switched on

1. Contact Customer Service.

Customer Service department

If the malfunction cannot be corrected, the device must

be checked by the Customer Service department.

Disposal

At the end of its service life, the device is to be disposed

of in accordance with statutory regulations.

Warranty

The warranty conditions issued by our relevant sales

company apply in all countries. We shall remedy possi-

ble malfunctions on your appliance within the warranty

period free of cost, provided that a material or manufac-

turing defect is the cause. In a warranty case, please

contact your dealer (with the purchase receipt) or the

next authorised customer service site.

(See overleaf for the address)

Accessories and spare parts

Only use original accessories and original spare parts.

They ensure that the appliance will run fault-free and

safely.

Information on accessories and spare parts can be

found at www.kaercher.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 30-1 Tact Te M Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info