Bedienungsanleitung Karcher NT 75-1 (Seite 20 von 292) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478623

Zoom out

Zoom in

Vorherige Seite

1/292

Nächste Seite

– 3

The appliance allows 2 operating modes:

1 Industry vacuum cleaner mode (socket

not used)

2 Dedusting mode (socket used)

 Connect the suction hose and insert in-

sert the suction nozzle or connect to the

dust-generating device depending on

the operating mode.

ṇ Warning

Do not vacuum without the filter elements;

otherwise, the suction motor can get dam-

aged and this can be hazardous to health

on account of increased release of fine dust

particles.

The horn blows when the air speed falls be-

low 20 m/s.

Note: The horn reacts to negative pres-

sure.

 Set the rotary switch to the correct suc-

tion hose cross-section.

Static charge is deflected by providing

earthing to the connection nozzles. This

prevents the formation of sparks and cur-

rent shocks due to attachments (option)

with electrical conductivity.

– The appliance is equipped with a paper

filter bag fitted with locking lid.

Order No. Safety filter sack: 6.904-

420.0 (5 pieces)

Note:You can use this appliance to take up

all types of dust up to dust class H. It is stat-

utorily necessary to use a dust collection

bag (see Filter systems for order number).

Note: The appliance is suited as industrial

vacuum cleaner and as dedusting device

for the mobile operation to take up dry, non-

combustible dusts with MAK values.

– Unused flat-fold filters may only be

stored and transported in the packaging

(carton).

Illustration

– The lamella of the flat-fold filter should

not be touched during installation.

ṇ Warning

The flat-fold filter and the safety filter sack

must never be removed during the dust ex-

traction process.

 Release and remove the suction head.

Illustration

 Insert the safety filter sack.

Illustration

 Place the safety filter bag over the con-

tainer and insert the interior paper filter

bag into the container in an L-shaped

fashion.

 Insert and lock the suction head.

ƽ Danger

No dusts hazardous to health should be

sucked in during wet vacuuming.

Illustration

 Remove the brush strips.

 Install the rubber lips.

Note: The structured side of the rubber lips

must point outwards.

Illustration

 Properly insert the connection socket in

the suction connection.

 Push in the connection socket until it

locks into place.

 Turn the suction connection with the

connection socket to the right to close it

tightly.

Note: The accurate fit is ensured by means

of a "bayonet connection".

 Release and remove the suction head.

Illustration

 Pull over the safety filter sack.

Illustration

 Pull out the safety sheet.

 Close the safety filter sack using the

self-adhesive flap.

Start up

Horn

Anti-static system

Dry vacuum cleaning

Installing the safety filter sack

Wet vacuum cleaning

Inserting the rubber lips

Close the suction connection

Removing the safety filter sack

20 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 75-1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info