Bedienungsanleitung Karcher NT 75-1 (Seite 21 von 292) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478623

Zoom out

Zoom in

Vorherige Seite

1/292

Nächste Seite

– 4

 Pull the safety filter bag down and back-

wards from the filter nozzle.

Illustration

 Close tightly the opening of the suction

connection of the safety filter sack using

the closing lid.

Illustration

 Securely close the safety filter bag with

the attached cable tie.

 Remove the safety filter bag.

 Wipe the inside of the container using a

damp cloth.

 Dispose of the safety filter bag in a dust-

tight bag according to the statutory pro-

visions.

 Insert and lock the suction head.

– To suck wet dirt, always remove the

safety filter bag.

ṇ Warning

The flat pleated filter must must always be

in place while vacuuming.

– If wet dirt is vacuumed with the uphol-

stery or crevice nozzle, or if water is

sucked up from a container, it is recom-

mended to deactivate the "automatic fil-

ter cleaning" function.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the flat

folded filter with the filter cleaning.

Clean the electrodes with a brush.

Clean the container with a damp rag

and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

 Plug in the main plug.

 Switch on the appliance at the rotating

knob.

 Set the suction output (min - max) at the

rotary switch.

ƽ Danger

Risk of injury and damage! The socket out-

let is only for the connection of power tools

to the vacuum cleaner. Any other use of the

socket outlet is not permitted.

 Connect the mains plug of the electric

power tool to the vacuum cleaner.

 Switch on the appliance at the rotating

knob.

Indicator lamp is on; vacuum cleaner is in

the standby mode.

Note: The vacuum cleaner is turned on and off

automatically with the electric power tool.

Note: The vacuum cleaner starts automat-

ically within 0.5 seconds and continues to

run for 15 seconds after the power tool has

being switched off.

Note: Please refer to "Technical specifica-

tions" for the power connection specifica-

tions of the power tools.

Illustration

 Adjust the stepped power tool adaptor

to fit the connection of the electric pow-

er tool.

General

Clip connection

Operation

Rotating knob

– Appliance ON

– Filter dedusting OFF

– Appliance OFF

– Appliance ON

– Filter dedusting ON

Turning on the Appliance

Adjust the suction output

Working with electrical power tools

21EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 75-1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info