Bedienungsanleitung Karcher SC 3 Upright EasyFix Premium (Seite 14 von 188) (Alle Sprachen)

724890

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

14 English

3. Drain the water reservoir.

Illustration U

Storing the device

ATTENTION

Material damage due to condensate/moisture

The floor covering can be damaged by moisture remain-

ing on the floor cleaning cloth or floor nozzle/device af-

ter cleaning.

Remove the floor cleaning cloth/carpet glider and dry

the floor nozzle/the device after finishing the floor clean-

ing work.

Do not place or store the device on heat-sensitive sur-

faces.

1. Remove the floor cleaning cloth or floor cleaning

cloth and carpet glider, see the chapter Floor nozzle

and carpet glider.

Illustration D

Illustration E

2. Remove moisture from the floor nozzle/device.

3. Wind the power cable around the upper and lower

cable hooks.

Illustration V

4. Store the device in vertical position on a solid base

or on the wall.

Illustration I

5. Store the device in a dry location that is protected

from frost.

Important application instructions

Cleaning the floor areas

We recommend sweeping the floor or vacuum cleaning

it before using the appliance. In this way the floor will be

cleared of dirt and loose particles before the wet clean-

ing.

Cleaning coated or painted surfaces

ATTENTION

Damaged surfaces

Steam can loosen wax, furniture polish, plastic coatings

or paint and edge band from edges.

Do not direct the steam at glued laminated edges as the

edge band may loosen.

Do not use the device for cleaning unsealed wood or

parquet floors.

Do not use the device for cleaning painted or plastic

coated surfaces such as kitchen or living room furniture,

doors or parquet.

How to use the Accessories

Floor nozzle

The floor nozzle is suitable for cleaning washable floor

coverings, e.g. stone floors, tiles and PVC floors, and al-

so sealed wooden floors such as parquet and laminate.

ATTENTION

Damage due to steam effects

Heat and the effects of steam can lead to damage.

Check the heat resistance and steam effect on an in-

conspicuous area using a minimal steam volume prior

to use.

Steam clean sealed wooden floors using the correct,

preset steam level and do not remain in the same posi-

tion on the floor for too long

Note

Detergent residue or care emulsions on the surface to

be cleaned can lead to streaks during steam cleaning,

which will disappear however once these have been

used several times.

몇CAUTION

Beware of burns to your feet

The floor nozzle/floor cleaning cloth heats up during

steaming.

Hot water may drip out when pulling off the floor cloth.

Only operate or remove the floor nozzle/floor cleaning

cloth with suitable footwear.

1. Fasten the floor cleaning cloth to the floor nozzle.

a Place the floor cleaning cloth with the hook and

loop fastener strips pointing upwards on the floor.

b Place the floor nozzle onto the floor cleaning

cloth, applying slight pressure.

Illustration D

The floor cleaning cloth will stick to the floor nozzle

of its own accord due to the hook and loop fastener.

Micro fibre cloth

The microfibre floor cloth is suitable for cleaning stone

floors and PVC floors, and also sealed wooden floors

such as parquet and laminate. The microfibre floor cloth

is also suitable for freshening carpets when used in con-

junction with the carpet glider.

Abrasive floor cloth

The abrasive floor cloth is suitable for cleaning insensi-

tive surfaces such as tiles or stone.

ATTENTION

Damage to floor coverings

The abrasive floor cloth can damage sensitive floor cov-

erings and surfaces.

Do not use the abrasive floor cloth for cleaning wooden

surfaces.

Do not use the abrasive cloth with the carpet glider.

Removing the floor cleaning cloth

1. Place one foot on the bottom corner of the floor

cleaning cloth and lift the floor nozzle up.

Illustration D

Note

Initially, the floor cleaning cloth's hook and loop fas-

tener strip is very strong and cannot be removed

from the floor nozzle easily. After the floor cleaning

cloth has been used several times and washed, it is

easier to remove from the floor nozzle and it has

reached the optimum adhesion.

Removing the floor nozzle from the basic device

ATTENTION

Material damage due to an unstable device

Removing the floor nozzle makes the device unstable

and it can tip over and damage the device and floor cov-

ering.

Do not remove the floor nozzle from the basic device af-

ter installation.

Remove the floor nozzle only when sending the device

for servicing.

1. Press the OFF switch

Illustration S

2. Pull the mains plug out of the socket.

Illustration T

3. Empty the water reservoir.

Illustration U

4. Hold the device by the handle.

5. Actuate the unlocking button on the floor nozzle.

6. The floor nozzle releases from the device and can

be removed.

Illustration W

7. Store the device safely in a horizontal position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 3 Upright EasyFix Premium Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info