Bedienungsanleitung Karcher SC 3 (Seite 14 von 186) (Alle Sprachen)

657212

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

– 8

Illustration

 Put the extension pipes into the large accessory

compartments.

 Insert the manual nozzle and detail nozzle onto

each extension pipe.

 Attach the big round brush to the small detail nozzle.

 Put the small round brush and nozzles into the me-

dium accessory compartment.

 Hook the floor nozzle into the parking position.

 Wrap the steam hose around the extension pipes

and insert the steam pistol into the floor nozzle.

It is recommended to sweep or vacuum the floor prior

to using the steam cleaner. This way, the floor is already

cleared of dirt/loose particles prior to the wet cleaning.

Prior to treatment with the steam cleaner, always check

the reaction of the textiles in an inconspicuous location:

Steam at first, then let dry and then check for colour or

shape changes.

When cleaning painted or plastic-coated surfaces, as

found on kitchen and living room furniture, doors, par-

quet; wax, furniture polish, plastic surfaces or paint can

come loose or stains can be created. When cleaning

these surfaces, briefly steam a cloth and wipe the sur-

faces with it.

ATTENTION

Never direct the steam jet at glued edges as the edge

band may loosen. Do not use the steam cleaner on un-

sealed wooden or parquet floors.

In case of low outside temperatures, especially in the

winter, warm up the window pane by slightly steaming

the entire glass surface. This will prevent tensions on

the surface which might lead to glass breakage.

Then clean the window surface with the hand nozzle

and attachment. Use a squeegee to remove the water

or wipe the surfaces dry.

ATTENTION

Do not direct steam onto the sealed locations of the win-

dow frame to prevent damage.

You can use the steam gun without any additional ac-

cessories, e.g.:

– to remove light wrinkles from hanging clothes by

steaming them at a distance of 10 to 20 cm.

– to remove dust from plants. Here, keep a distance

of 20-40 cm.

– for moist dusting, by briefly steaming the cloth and

wiping the furniture with it.

The closer this nozzle is to the contaminated area, the

higher the cleaning effect, as the temperature and the

steam are highest at the nozzle output. Especially suit-

ed for cleaning difficult access locations, joints, fittings,

drains, sinks, toilets, blinds and heaters. Heavy lime

scale can be drenched in vinegar prior to steam-clean-

ing. Let the vinegar penetrate for about 5 minutes.

The round brush can be installed onto the detail nozzle

as an accessory. Attached brushes can therefore be

used to remove heavy soiling.

ATTENTION

Not suitable for cleaning sensitive surfaces.

Illustration

 Attach the round brush to the detail nozzle.

The power nozzle can be installed onto the detail nozzle

as an accessory.

The power nozzle increases the emission speed of the

steam. Therefore, it is well-suited for cleaning very

tough dirt, blowing out corners, grooves, etc.

Illustration

 Attach the power nozzle to the detail nozzle ac-

cording to the round brush.

The round brush can be installed onto the detail nozzle

as an accessory. This round brush allows to clean large

rounded surfaces (e.g. sink, shower tray, bathtub, kitch-

en sink).

ATTENTION

Not suitable for cleaning sensitive surfaces.

Illustration

 Attach the round brush to the detail nozzle.

Illustration

 Install hand nozzle on steam gun.

Pull the cloth cover over the hand nozzle. Especially

well-suited for small washable areas, shower stalls and

mirrors.

Suited for all washable walls and floor coverings, e.g.

stone floors, tiles and PVC floors. Work slowly on very

dirty surfaces to allow the steam to act on the dirt for a

longer period of time.

Note

Detergent residue or care emulsions that are still pre-

sent on the surface to be cleaned can lead to streaks

during steam cleaning. However, these will disappear

with repeated cleaning procedures.

Illustration

 Attach the floor cloth to the floor nozzle.

1 Place the floor nozzle on top of the floor cloth.

Depending on model - fold bevore the floor cloth

the long way.

2 Open holding clamps.

3 Place the cloth ends into the openings.

4 Close the holding clamps.

몇 CAUTION

Do not insert fingers between the clamps.

Storing the Appliance

How to Use the Accessories

Important application instructions

Cleaning floor surfaces

Refreshing textiles

Cleaning of Coated or Lacquered Surfaces

Cleaning of Glass

Steam gun

Detail nozzle

Round brush (small)

Power nozzle

Round brush (big)

Hand nozzle

Floor nozzle

14 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 3 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info