Bedienungsanleitung Karcher SC 6.800C (Seite 20 von 326) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

501675

Zoom out

Zoom in

Vorherige Seite

1/326

Nächste Seite

– 9

 Pull the water reservoir straight up.

 Fill the water reservoir up to the "MAX"

marking while positioned vertically un-

der the water tap.

 Insert the water reservoir and press

downwards until it arrests.

 Pour water from a container into the

funnel inlet. Fill up to the "MAX" mark-

ing.

 Place the unit securely on a firm sur-

face.

 Insert the mains plug into a socket.

 Rotate the selector switch to one of the

steam levels from the OFF position.

Display - steam gun lights up green.

Display - steam level lights up white

and/or VapoHydro level lights up red.

Display - heater blinks green.

Note: If there is no or not enough water in

the steam boiler, the water pump starts and

supplies water from the reservoir into the

steam boiler. The filling process may take

several minutes.

 Wait until the heater display lights up

permanently.

The steam cleaner is ready to use.

Note: The appliance briefly closes the

valve every 60 seconds. This will prevent

the valve from sticking. There will be a

slight audible click. The steam delivery is

not impaired by this.

In case of water shortage, the water short-

age display lights up red and a signal can

be heard.

Note: Every time there is not enough water

in the steam boiler, the pump automatically

supplies water from the water reservoir into

the steam boiler. If the water reservoir is

empty, the water pump is not able to fill the

steam boiler and the steam tapping is

blocked.

 Fill the water reservoir up to the "MAX"

marking.

Note: The water pump tries to fill the steam

boiler in short intervals. If the filling is suc-

cessful, the steam tapping is released im-

mediately, and the red display goes out.

The emerging steam is regulated by a se-

lector switch. This selector switch offers

five settings for different grades of contam-

ination. The following shows application ex-

amples for the steam levels, types of

contamination and objects:

Light contaminations, i.e.:

– Dust

Objects / surfaces, for example:

– Plants, sensitive, painted or coated sur-

faces

Light to medium contamination or fresh

contamination, i.e.:

– Finger prints, dust, food residue, rain-

drops, toothpaste traces

Objects / surfaces, for example:

– enclosed heaters, mirrors, windows,

plastic/metal surfaces

Medium to strong contamination or older,

crusted contamination, i.e.:

– slight grease layer, finger prints, fly fec-

es, spray from food or toothpaste

Objects / surfaces, for example:

– Surfaces in kitchen, bathroom, window,

ceran stove top, wall tiles, tiled floors,

PVC, linoleum

Heavy contamination, i.e.:

– old crusted food residue, detergent res-

idue, light lime scale, heavy grease lay-

er, dried water spots, soap scum

Objects / surfaces, for example:

– Tiled floors, PVC, linoleum, wall tiles,

grout between tiles, sink, shower tub,

bath tub,

Take off water reservoir

Directly on the appliance

Turning on the Appliance

Refilling Water

Adjusting the Steam Quantity

Steam level 1

Steam level 2

Steam level 3

Steam level 4

20 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 6.800C Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info