Bedienungsanleitung Karcher SC 6.800C (Seite 21 von 326) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

501675

Zoom out

Zoom in

Vorherige Seite

1/326

Nächste Seite

– 10

Jagged, angled areas that can be sprayed

with water, such as:

– hard crusts, dirt that has settled in grout

and corners, soap scum, light lime

scale

Objects / surfaces, for example:

– Bathroom fixtures, interior window

frames (not wooden frames), bathroom

shelves, stove burners, shower stalls,

drains

 Set selector switch to the required

steam volume.

 While operating the steam switch, al-

ways direct the steam gun at a separate

piece of cloth until the steam is emitted

evenly.

 Rotate the switch to the OFF position to

turn off the appliance.

 Disconnect the mains plug from the

socket.

 Press the cover of the appliance con-

nector to the bottom and disconnect the

steam plug from the appliance connec-

tor.

 Empty the residual water from the water

reservoir.

Illustration -

 Store the power nozzle and the round

brush in the accessory compartment.

 Insert the manual nozzle onto each ex-

tension pipe.

 Put the extension pipes into the large

acessory holders.

 First, insert the extension and then the

point spray nozzle into the accessories

compartment.

 Hook the floor nozzle into the parking

position.

 Wrap the steam hose around the exten-

sion pipes and insert the steam pistol

into the floor nozzle.

 Stow away the mains cable in the ac-

cessory holder for the mains cable.

It is recommended to sweep or vacuum the

floor prior to using the steam cleaner. This

way, the floor is already cleared of dirt/

loose particles prior to the wet cleaning.

Prior to treatment with the steam cleaner,

always check the reaction of the textiles in

an inconspicuous location: Steam at first,

then let dry and then check for colour or

shape changes.

When cleaning painted or plastic-coated

surfaces, as found on kitchen and living

room furniture, doors, parquet; wax, furni-

ture polish, plastic surfaces or paint can

come loose or stains can be created. When

cleaning these surfaces, briefly steam a

cloth and wipe the surfaces with it.

Caution

Never direct the steam jet at glued edges

as the edge band may loosen. Do not use

the steam cleaner on unsealed wooden or

parquet floors.

In case of low outside temperatures, espe-

cially in the winter, warm up the window

pane by slightly steaming the entire glass

surface. This will prevent tensions on the

surface which might lead to glass break-

age.

Then clean the window surface with the

hand nozzle and attachment. Use a squee-

gee to remove the water or wipe the surfac-

es dry.

Caution

Do not direct steam onto the sealed loca-

tions of the window frame to prevent dam-

age.

Steam level 5 – Vapohydro function

Adjusting the steam quantity

Turning Off the Appliance

Storing the Appliance

How to Use the Accessories

Important application instructions

Cleaning floor surfaces

Refreshing textiles

Cleaning of Coated or Lacquered

Surfaces

Cleaning of Glass

21EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 6.800C Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info