Bedienungsanleitung Karcher WD 7.200 (Seite 16 von 184) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

477963

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

– 4

Illustration

 Turn on the machine.

 Position I: Suction or blowing

 Position 0: Appliance is switched off

 Position MAX: Suction or blowing.

 Position MAX: Vacuuming with

connected electric tool

 Performance regulation: Reduce the

suction if necessary during vacuuming,

blowing or when working with an elec-

tric tool.

 Position 0: The appliance is switched

off. Electric tool is supplied with voltage.

ṇ Work only with a dry flat fold filter!

Illustration

Recommendation for appliances with-

out filter cleaning: To vacuum fine dust,

use the filter bag.

 The filling level of the filter bag depends

on the dirt that is sucked in.

Clogged filter bags can burst - therefore

make sure to replace the filter bag in a

timely manner!

The filter bag needs to be replaced

more frequently while sucking in fine

dust, sand, etc.

For appliances with ExPress filter clean-

ing: When vacuuming without a filter bag,

the filter cleaning indicator lights up red if

the flat fold filter needs to be cleaned.

 Use the filter cleaning.

The ExPress filter cleaning is intended for

the vacuuming of large volumes of fine dust

without the filter bag inserted.

If the filter cleaning indicator is red, clean

the flat fold filter:

Illustration

 Press the filter cleaning key 3 x times

with the appliance switched on; wait

about 4 seconds between the individual

presses.

Note: After several filter cleaning proc-

esses or if the filter cleaning indicator is

red, check the container for its fill vol-

ume. Empty the container if needed.

 Attach the accessories to vacuum mois-

ture or wetness to the suction pipes or

directly to the handle.

ṇ Caution:

Do not use a filter bag!

Immediately switch the appliance off if foam

forms or liquids escape!

Note: If the container is full a float closes

the suction opening and the appliance

works at a higher speed. Switch off the ap-

pliance immediately and empty the contain-

er.

 Adapt the adapter to the connection di-

ameter of the electric tool using a knife

if necessary.

Illustration

 A) Plug the enclosed adapter onto the

handle of the suction hose and connect

the electric tool with the connection.

or

B) Use the flexible tool hose to gain

more flexibility in your work. Connect

this hose to the suction hose and to the

adapter and then to the connection of

the electric tool.

Illustration

 For appliances with built-in socket:

Connect the mains plug of the electric

power tool to the vacuum cleaner.

 Switch the appliance on (move the rota-

ry switch to the left to position

MAX) and start working.

Note: The suction turbine starts with a

delay of 0.5 seconds after the electric

tool has been switched on. After the

electric tool has been switched off, the

suction turbine will continue to run for

approx. 5 seconds to suck in the re-

maining dirt from the suction hose.

For appliances without built-in socket.

For appliances with built-in socket

Dry vacuum cleaning

ExPress filter cleaning

Wet vacuum cleaning

Working with electrical power tools

16 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher WD 7.200 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info