Bedienungsanleitung Karcher WD 7.200 (Seite 17 von 184) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

477963

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

– 5

Cleaning hard to reach locations or, where

vacuuming is not possible, like leaves from

a gravel bed.

Illustration

 Connect the suction hose to the blower

connection, this will activate the blower

function.

 Turn off the appliance.

Illustration

 Hook the floor nozzle into the parking

position.

 Turn off the appliance and disconnect

the mains plug.

Illustration

 Remove the appliance head and empty

the reservoir filled with wet or dry dirt.

Illustration

 Store the accessories and the mains

cable on the appliance and store the

appliance in dry rooms.

ƽ Danger

Turn off the appliance and remove the

mains plug prior to any care and mainte-

nance work.

Repair works may only be performed by the

authorized customer service.

ṇ Caution

Do not use abrasives, glass or universal

cleaners! Never immerse the appliance in

water.

 Clean the appliance and accessory

parts made of plastic with a commercial

plastic cleaner.

 If required, rinse the container and ac-

cessories with water properly and dry

them before reuse.

Illustration

 For appliances without filter clean-

ing:

Release and open the filter flap. Re-

move the frame and filter and knock the

dirt out of the filter. Clean the filter under

running water if necessary. Do not rub

or brush the filter dry.

Let it dry completely prior to installation.

Illustration

 After that, insert the filter first and then

the frame.

 For appliances with ExPress filter

cleaning: Use the filter cleaning (see

Chapter "ExPress filter cleaning").

Note: If the suction performance is still

not satisfactory, in spite of the cleaning,

separate the suction hose from the

pipes, hold the opening of the suction

hose shut/close it and activate the filter

cleaning button three more times with

the suction hose held shut.

 The mains cable is probably dirty, clean

the mains cable.

 Turn off the appliance immediately.

Illustration

 Clean the floater system.

Remove the appliance head, unscrew the

floater basket (A) in the direction of the ar-

row and remove it. Remove the floater (B)

and clean both under flowing water.

If necessary, also clean the cover for

the floater valve (C): For this, release

and remove the cover. Reattach after

the cleaning process and lock it (ob-

serve the markings and symbols).

To install, first insert the floater, then

add the floater basket and lock it.

Blowing function

Interrupting operation

Finish operation

Empty the container

Storing the appliance

Maintenance and care

Clean flat fold filter

Troubleshooting

Mains cable retraction does not

function

Water is leaking

17EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher WD 7.200 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info