Bedienungsanleitung Katadyn PowerSurvivor 80E (Seite 16 von 36) (Englisch)

522392

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

1. Unscrew the prefilter housing, remove the dirty

prefilter element, and discard the water in the

bowl. Do not lose the large o-ring at the top of

the bowl.

Warning: If you purchase after-

market filter elements, be certain

they are made from polyester fibers.

In particular, be wary of elements

made of paper materials. They look

very similar, but are designed for

use with other types of water purifi-

cation systems and are harmful to

the membranes and high pressure

pumps used in reverse osmosis

watermakers. Be certain you

purchase only polyester filter

elements of 30-micron (or finer) size.

2. Clean the inside surface of the prefilter bowl.

Inspect and clean the o-ring at the top of the

bowl. Lubricate the o-ring and the threads of

the prefilter housing with a light coat of silicon

grease.

3. Install a clean filter element and screw the

prefilter bowl back on securely.

4. If the watermaker will not be used within the

next three days, treat it with membrane

preservative (see Membrane Storage below).

5. Tie a line through the center of the dirty filter

element and, if underway, tow it behind the vessel for a few minutes. If the vessel is

anchored, hang the dirty filter over the side of the boat so that it is underwater, and

jerk/shake it up and down a few times to dislodge the contaminants.

6. Dry the filter element thoroughly, preferably in the sun. Then store it for use as a clean

filter the next time the prefilter assembly is serviced.

We do not recommend scrubbing filter elements with brushes or other abrasive tools or

materials, as such treatment is unnecessary and greatly shortens the life of the filter element. If

filter elements are cleaned regularly as directed, and not allowed to become extremely dirty,

they can be expected to last for many months of service with nothing more than the gentle

cleaning described above. Clean filter elements also help assure unrestricted flow of intake

seawater to the pump.

Membrane Storage, Preserving & Cleaning

The two reverse osmosis membrane elements inside the membrane housing are expensive and

delicate components of your system. When properly cared for, they can be expected to last for

several thousand hours of use. However, improper use, maintenance or handling can damage

or destroy them very quickly.

Membrane Preservative Treatment: The primary

purpose of a membrane preservative treatment is to keep

membrane moist and reduce biological growth on the

membrane surface. Over time, biological matter can adhere to

the membrane surface, thus gradually decreasing its

effectiveness. When the watermaker is not to be used for an

extended period of time, you should preserve the membrane.

A membrane preservative treatment is effective for

approximately one year (storage temperature <25°C/77°F). If

longer storage is required, the membrane preservative

treatment should be repeated every year.

Warning: Be sure to follow the flushing procedures described below to ensure that the

membrane preservative solution does not get into the freshwater supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Katadyn PowerSurvivor 80E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Katadyn PowerSurvivor 80E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info