Bedienungsanleitung Katadyn Vario (Seite 7 von 10) (Englisch)

522426

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Maintain your Katadyn water system to keep it operating smoothly.

1) If handle is hard to push:

Lubricate o-rings of pistons. Silicone lubricant is provided with your new unit.

Remove axis from top cap by turning it 90° and pushing it out of its position. A coin

can be used to turn the axis. Detach the translucent top cap and put aside. Grasp the

pump handle and lift it upwards until the pistons come out of their position. Clean

excess build-up from black rubber o-rings on pistons. Place a small amount of silicone

lubricant all the way around the o-rings. Re-assemble. Note:

When reassembling,

carefully insert pistons, making sure to not pinch o-rings.

Clogged cartridge. A clogged cartridge requires replacement. As a temporary

solution in the field, remove the cartridge and swish it around in water. See Cartridge

Installation for cartridge removal. Take care that untreated water does not contact the

cartridge output barb. If flow is not restored, replace cartridge.

2) If unit pumps easily, but no water flows:

Make sure prefilter is submerged.

Make sure that hoses are not blocked or pinched.

Clean ceramic prefilter. Occasionally high pressure develops inside the pump

head and prevents the filter from operating properly. This can be easily eliminated by

removing the pump head and cleaing the ceramic prefilter with the cleaning pad pro-

vided. Pump slowly to get water started and resume normal pump rate when flow has

begun.

3) Intake Prefilter: Rinse the strainer in water to remove any particles that may be

caught in the strainer. For a more thorough cleaning, remove the prefilter from the input

hose and clean with water and a soft brush. Reassemble. Apply a small amount of sil-

icone lubricant to the strainer barb to ease assembly. (Figure 2-1)

For use without the weight. The prefilter is functional with or without the weight

(we recommend using with the weight). To use without the weight, remove the strainer

barb from the input hose. Reassemble without the weight.

4) Storage: Your Katadyn water system comes with a carry bag for storage. To prevent

the possibility of cross contamination, store the output hose with the clip separately in

the resealable bag inside the carry bag.

Long-Term Storage (After Your Trip is Over)

Disinfect your Vario microfilter before storage to prevent microbiological growth within the

pump. Do not use any alcoholic detergents, since it will damage the surface of the filter.

1) Fill a liter container with tap water and add 2 tablets of Micropur (if not available use

2 tablespoons of ordinary household bleach).

2) Place prefilter into solution.

3) Pump entire amount of solution through unit (into sink or container).

063268 Katadyn-8015062-B:Vario Filter multi-manual 25.10.2006 7:42 Pag

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Katadyn Vario Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Katadyn Vario

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info