Bedienungsanleitung Kaysun Amazon V - K2F (Seite 4 von 8) (Englisch)

771562

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

▪ The function in this program uses the minimum temperature drop

(minimum indoor cooling) to bring about a drop in humidity in the

room.

▪ In the drying process, the system automatically determines the

temperature and fan rotation speed (cannot use the user interface

to implement the settings).

Once the unit has stopped running, do not disconnect the power

immediately. Wait for at least 5 minutes.

Do not touch the air outlet or the horizontal blade when operating

in the fan swing mode. Your ngers may be caught in the unit or

the unit may be damaged.

Do not check or repair the unit on your own. Please get relevant

professionals to conduct any check or repairs.

Do not use substances like gasoline, diluent, and chemical dust

cloth to wipe the operations panel of the controller. This may

remove the surface layer of the controller. If the unit is dirty,

immerse a cloth in diluted and neutral detergent, squeeze it dry,

and then use it to clean the panel. Finally, wipe it with a dry cloth.

When the fuse melts, do not use any unspecified fuse or other

wire to replace the original fuse. The use of electrical wires or

copper wires may cause the unit to malfunction or cause a re.

Adjust

Refer to the user manual for the controller on how to set the required

temperature, fan speed and air ow direction.

Start

1. Press the switch button on the controller.

Result: The running light turns on and the system starts to run.

2. Repeatedly press the mode selector on the controller.

3. Press the button to adjust the air ow direction (this function is not

available for all indoor units).

Stop

4. Press the switch button on the user interface again.

Result: The running light is now off, and the system stopped

running.

Note

Warning

Note

Warning

5.3 Using the Dry Program

5.3.1 About the dry program

5.3.2 Using the dry program

6 Maintenance and Repair

Do not insert fingers, sticks, or other items into the air inlet or

outlet. Do not remove the fan mesh cover. When the fan rotates

at a high speed, it may cause bodily injury.

It is very dangerous to check the unit when the fan is rotating.

Make sure you turn off the main switch before any maintenance

work begins.

Do check the supporting and base structure of the unit for any

damages after a long period of use. The unit may drop and

cause personal injury if there is any damage.

For example, in early summer or winter.

▪ Check and remove all objects that may clog the air inlets and

outlets of the indoor and outdoor units.

▪ Clean the air lter and external shell of the unit. Please contact

the installation or maintenance personnel. The installation/

operation manual of the indoor unit includes maintenance tips

and cleaning procedures. Make sure that the clean air filter is

installed in its original position.

▪ Turn on the main power supply 12 hours before this unit is

operated in order to ensure that the unit runs smoothly. The user

interface is displayed once the power is turned on.

For example, at the end of winter and summer.

▪ Run the indoor unit in the fan mode for about half a day to dry the

internal parts of the unit.

▪ Turn off the power supply.

▪ Clean the air lter and external shell of the unit. Please contact

the installation or maintenance personnel to clean the air filter

and external shell of the indoor unit. The installation/operation

manual of the specialized indoor unit includes maintenance tips

and cleaning procedures. Make sure that the clean air filter is

installed in its original position.

▪ This product contains the warranty card that was completed

by the agent during installation. The customer must check the

completed warranty card and keep it properly.

▪ If you need to repair the air conditioner during the warranty

period, please contact the agent and provide the warranty card.

This product contains uorinated greenhouse gases as stipulated in

the Kyoto Protocol. Do not discharge the gas into the atmosphere.

Refrigerant Type: R410A

GWP Value: 2088

Based on the applicable law, the refrigerant must be checked

regularly for leakages. Please contact the installation personnel for

more information.

Warning

6.1 Maintenance after Unit has been Shut Down for a Long Period

6.2 Maintenance Before Unit is Shut Down for a Long Period

6.3 About the Refrigerant

The refrigerant in the air conditioner is relatively safer, and usually

does not leak. If the refrigerant leaks, and comes in contact with

burning objects in the room, it will produce harmful gases.

Shut down any ammable heating device, ventilate the room and

contact the agent of the unit immediately.

Do not use the air conditioner again until the maintenance

personnel has confirmed that the refrigerant leakage has been

sufciently resolved.

Warning

6.4 After-sales Service and Warranty

6.4.1 Warranty period

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun Amazon V - K2F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun Amazon V - K2F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info