Bedienungsanleitung Kaysun Amazon V - K2F (Seite 7 von 8) (Englisch)

771562

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

16127000002047 V3.0

The following fault symptoms are not caused by the air conditioning:

▪ Air conditioner does not start immediately after pressing the

switch button on the controller. If the operating indicator lights up,

the system is working normally. In order to prevent overloading

of the compressor motor, restart the air conditioner 12 minutes

after the switch button is pressed to prevent it from shutting down

immediately after it is on. The same start-up delay occurs after the

mode selector is pressed.

▪ A soft, continuous hissing sound can be heard when the system

is in cooling or defrosting operation. This is the sound of the

refrigerant gas owing in the indoor and outdoor units.

▪ A hissing sound is heard the moment the system starts or stops

operation or after the defrosting operation has been completed.

This is the noise produced when the refrigerant ow is stopped or

changed.

When the tone of the operating noise changes. This noise is caused

by frequency changes.

When using the unit for the rst time. This is because there is dust

inside the unit.

This unit will absorb the odours of rooms, furniture, cigarettes and

others, and then disperse the odours again.

Small animals stray into the unit, which can also cause odors.

Different types of indoor units operating in the same system. When

another unit is running, part of the refrigerant will still ow through this

unit.

Please contact the agent to dismantle and reinstall all the units. You

need specialized skills and technology to move the units.

This unit uses hydrogen fluorocarbons. Please contact the agent

when you want to dispose this unit. Based on the requirements of the

law, the collection, transportation and disposal of refrigerants must

be in accordance with the regulations governing the collection and

destruction of hydrouorocarbons.

In the course of operation. Control speed of fan motor to optimize the

product operations.

Even if the fan speed regulation button is pressed, the fan speed does

not change. During heating, when the indoor temperature reaches

the set temperature, the outdoor unit will shut down, and the indoor

unit switches to the quiet fan speed mode. This is to prevent cold air

from blowing directly at the room user. The fan speed will not change

even when another indoor unit is in heating operation, if the button is

pressed.

▪ During cooling when the humidity is high. If the interior pollution of

the indoor unit is severe, the indoor temperature distribution will be

uneven. Need to clean the interior of the indoor unit. Ask the agent

for detailed information on how to clean the unit. This operation

must be carried out by qualied maintenance personnel.

▪ Surface immediately after cooling has stopped and when the indoor

humidity is relatively low. This is due to the steam produced by the

warm refrigerant gas on its return path to the indoor unit.

▪ A "zeen" sound is heard the moment the system is powered on.

This noise is produced by the electronic expansion valves inside

the indoor unit as they begin to work. The sound volume will be

reduced in about 1 minute.

▪ A soft and continuous "shah" sound can be heard when the system

is in a cooling mode or has stopped running. This noise can be

heard when the drainage pump is running (optional accessory).

▪ A loud creaking "pishi-pishi" sound can be heard once the

system stops after it has heated up the room. The expansion and

contraction of plastic parts caused by temperature changes will

also make this noise.

▪ Once the indoor unit stops, a soft "sah" or "choro-choro" sound can

be heard. This noise can be heard when another indoor unit is still

running. Must maintain a small amount of refrigerant ow in order

to prevent oil and refrigerant residues in the system.

After the defrosting operation, switch the system to the heating mode.

The moisture produced by the defrosting operation will become steam

to be discharged out of the system.

The air direction is not consistent with the user interface display. The

air direction does not swing. This is because the unit is controlled by

the centralized controller.

7.2 Fault Symptom: Non Air Conditioning Issues

7.2.1 Fault symptom: System cannot run

7.2.7 Fault symptom: Noise from air conditioner (indoor unit,

outdoor unit)

7.2.8 Fault symptom: Noise from air conditioner (outdoor unit)

7.2.9 Fault symptom: Dust and dirt in the unit

7.2.10 Fault symptom: Strange odour from unit

7.2.11 Fault symptom: ODU fan does not run

7.2.12 Fault symptom: Hot air is felt when the indoor unit stops

8 Change Installation Site

9 Disposal

7.2.2 Fault symptom: Fan speed is not consistent with the setting

7.2.3 Fault symptom: Fan direction is not consistent with the setting

7.2.4 Fault symptom: White smoke from a certain unit (indoor unit)

7.2.5 Fault symptom: White smoke from a certain unit (indoor unit,

outdoor unit)

7.2.6 Fault symptom: Noise from air conditioner (indoor unit)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun Amazon V - K2F Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun Amazon V - K2F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info