Bedienungsanleitung Kaysun KEM-07 DVN1 (Seite 32 von 48) (Englisch)

771471

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

7.2.3 Functions of combination key

1. Force cooling

Press “ ” and “ ” simultaneously for 3s in the main

interface to enter into force cooling mode. The force cooling mode

icon will be constantly light.

Press “ ” button and “ ” button simultaneously for 3s to

quit force cooling mode. The unit will enter power off mode

automatically when quitting force cooling mode.

2. Parameter query function

①To enter parameter query function.

Press “ ” and “ ” simultaneously for 3s to enter the

interface of parameter query function. At this moment, first 2 digits

of the nixie tube will display sequence number and the

last 2 digits is specific parameters.

Press “ ” or “ ” to query the relative parameters.

See query orders in Table 11-1.

②Quit parameter query function If there’s no operation in 20s

when enter the parameter query, it will quit automatically and

return to the main interface.

Press “ ” and “ ” simultaneously to quit parameter query

manually.

3. Auto-lock(unlock) function

If don’t operate the controller in 60s, the keyboard will lock

automatically. Press “ ”and “ ” simultaneously for 3s

to unlock.

4. Factory Reset:

In main interface, long press “ENTER” for 3s, the unit will close and

recovers to factory default mode.

Display panel will display “OFF”.

7.2.4 Shutting down for long periods

If it is previewed not to use the machine for long periods After

deactivating the chiller:

-Make sure the model is in the Power off model " ", or

alternatively disconnect the unit from the power supply.

-Make sure the remote control switch is closed (if present) .

-Close the water valves.

Table.11-1 Query orders

No.

Content

Remark

Frequency

Display operating frequency when the unit is in cooling mode and heating mode.

Mode

0-Power off，1-water pump，2-cooling，3-heating，4-force cooling，5-force heating

Wind speed level

0-Power off (1-7)

Total capacity requirements

Capacity before revised (Force cooling displays 5)

Capacity requirements after revised

Capacity after revised (Force cooling displays 5)

Temp. set

Cooling/heating temp. set

Condenser temperature sensor

Outdoor ambient temperature sensor

Comp. Discharge temperature sensor

Tin

Inlet water temperature sensor of plate heat exchanger

Tout

Outlet water temperature sensor of plate heat exchanger

Tb1

Plate heat exchanger anti-freezing temperature sensor 1

Tb2

Plate heat exchanger anti-freezing temperature sensor 2

Radiator surface temperature(reserved)

Unit operation current

Power supply voltage AD value

Opening of EXV

Step number *8

Model

(Operation panel has no such function)

Version number

(Operation panel has no such function)

Err1

Err2

(PCB has no such function)

Err3

(PCB has no such function)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KEM-07 DVN1 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KEM-07 DVN1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info