Bedienungsanleitung Keiser M7i (Seite 18 von 20) (Englisch)

738040

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER

Weekly

• Check to ensure that the M7i is in safe proper working order:

– M7i is leveled (refer to page 11, “Leveler Foot” section).

– Handles operate properly, (refer to page 12, “Adjustment Knobs” section).

• Check that parts most susceptible to wear are not damaged or broken:

– Handles, Grips, Adjustment Knobs, Recoiler Safety Straps, Footpads, and Foot

Straps.

• Wipe all areas in the sweat path with a dry soft towel or cloth.

Monthly

• Clean external surfaces using warm soapy water and a soft cloth, especially around

the areas that come in contact with sweat.

– Do not use household or industrial cleaners as they can destroy the paint nish.

– For deeper cleaning, use only mild dish washing soap, followed by an automotive

treatment such as Meguiar’s

Quik Detailer Mist and Wipe.

Biannually

• Check to ensure all external visible screws and nuts are not loose and that they

are fastened tight.

• Check Handles, Grips, Adjustment Knobs, Recoiler Safety Straps, Footpads, and

Foot Straps and replace if worn.

• The low battery signal (“LO-BA”) will appear on the computer display when it is

time to replace the batteries (two D batteries per M7i, refer to “Computer Battery

Replacement” on page 19 for complete instructions).

NOTE: For establishments with multiple M7i machines, replacement of all computer

batteries at the same time is recommended.

• Apply wax to protect the paint nish on metal parts:

1. Wipe down and thoroughly clean the M7i prior to applying wax.

2. Use an easily applied automotive treatment such as Meguiar’s

Quik Detailer Mist

and Wipe.

3. Target areas that come in contact with sweat as they are most vulnerable to rust.

NOTE: Failure to apply a coat of wax to high-sweat areas at least twice annually

will decrease paint and frame life due to corrosion and will void the warranty.

• Apply lubricant to the Adjustment Knobs:

1. Unscrew Adjustment Knobs from the Arm.

2. Clean threads with a lint-free cloth.

3. Apply a moderate amount of lubricant to the threads.

NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It

is critical to keep the threads lubricated with a heavy grease (preferably white or

clear in color), such as HYDROTEX

Acculube #2 or any compound with equivalent

anti-wear and corrosion resistant properties.

1st Month

• Check to ensure all external visible screws and nuts are not loose and that they

are fastened tight.

• Check for broken stitches or parts; torn, cut or frayed material; or locks, buckles,

or hook and loop fasteners that do not hold securely.

Contact Keiser Customer Support for replacement part(s) order, or for any matters regarding the safe operation of

your M7i, by telephone at 1 559 256 8000, online 24/7 at keiser.com/support, or by email at service@keiser.com.

CAUTION: Routine maintenance is an essential part of maintaining the highest level of equipment safety, as

well as optimal equipment performance. Immediately replace damaged, worn, or broken parts and do not use

the M7i until all repairs have been completed and tested by a certied Keiser technician.

MAINTENANCE

PREVENTATIVE MAINTENANCE SCHEDULE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keiser M7i Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info