Bedienungsanleitung Kenwood FDP613 Multipro Home (Seite 13 von 109) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

630835

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

citrus juicer (

if supplied)

Use the citrus juicer to squeeze the juice from citrus fruits

(

eg oranges, lemons, limes and grapefruits).

cone

sieve

to use the citrus juicer

Fit the bowl onto the power unit, add the detachable drive

haft.

2 Fit the sieve into the bowl - ensuring the sieve handle is

ocked into position directly over the bowl handle

Place the cone over the drive shaft turning until it drops all

the way down

Cut the fruit in half. Then switch on and press the fruit onto

he cone.

●

The citrus juicer will not operate if the sieve is

not locked correctly.

●

For best results store and juice the fruit at room temperature

and hand roll on a worktop before juicing.

●

To help with juice extraction move the fruit from side to side

when juicing.

●

When juicing large quantities, empty the strainer regularly to

prevent the build up of pulp and seeds.

juice extractor (if supplied)

Use the centrifugal juicer for making juice from firm fruit and

vegetables.

safety

●

Do not use the juice extractor if the filter is

damaged.

●

Only use the pusher supplied. Never put your fingers in the

feed tube. Unplug before unblocking the feed tube.

●

Before removing the lid, switch off and wait for the filter to

stop.

●

Never use a damaged attachment.

pusher

lid

pulp remover

filter drum

to use the juice extractor

1 Fit the bowl to the power unit

2 Place the pulp remover into the filter drum - ensuring the

tabs locate with the slots in the bottom of the drum

3 Fit the filter drum

4 Place the attachment lid onto the bowl, turn until it locks and

the feed tube sits over the handle

. Your juice

extractor will not operate if the bowl or lid are

not fitted correctly into the interlock.

5 Cut the food to fit the feed tube.

6 Switch on and push down evenly with the pusher - never

put your fingers in the feed tube. Process fully before

adding more.

●

After adding the last piece, let the juice extractor run for a

further 30 seconds to extract all the juice from the filter

drum.

mportant

●

If the juice extractor starts to vibrate, switch off and empty

the pulp from the drum. (The juice extractor vibrates if the

ulp becomes unevenly distributed).

●

Maximum capacity that can be processed at one time is

800g of fruit or vegetables (refer to speed chart).

●

ome very hard foods may make your juice extractor slow

down or stop. If this happens switch off and unblock the

filter.

●

witch off and clear the pulp collector regularly during use.

ints

●

Before processing remove stones and pips (eg pepper,

melon, plum) and tough skins (eg melon, pineapple). You

on’t need to peel or core apples and pears.

●

Use firm, fresh fruit and vegetables.

●

To maximise juice extraction place small quantities at a time

n the feed tube and push down slowly.

●

Citrus fruit - peel and remove the white pith, otherwise the

juice may taste bitter. For best results use the citrus juicer.

attachment storage box (if supplied)

Your food processor is supplied with a storage box for your

discs.

1 Fit the discs into the storage box when not in use

2 The storage box is fitted with a safety lock - close the lid to

lock. To open lift up the lid

care & cleaning

●

Always switch off and unplug before cleaning.

●

Handle the blades and cutting discs with care -

they are extremely sharp.

●

Some foods may discolour the plastic. This is perfectly

normal and won’t harm the plastic or affect the flavour of

your food. Rub with a cloth dipped in vegetable oil to

remove the discolouration.

power unit

●

Wipe with a damp cloth, then dry. Ensure that the interlock

area is clear of food debris.

●

Don’t immerse the power unit in water.

●

Store excess cord in the storage area at the back of the

power unit

blender

1 Empty the goblet, unscrew the blade unit by turning to the

unlock position to release. Then remove the blade unit by

pushing up from underneath.

●

Care should be taken when removing the blade unit from the

base.

2 Wash the goblet by hand.

3 Remove and wash the seal.

4 Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

immerse the blade unit in water.

5 Leave to dry upside down.

dual whisk

●

Detach the beaters from the drive head by gently pulling

them free. Wash in warm soapy water.

●

Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood FDP613 Multipro Home Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info