Bedienungsanleitung Kenwood FP120 (Seite 7 von 78) (Alle Sprachen)

630933

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

slicing plate

f necessary cut food to fit the feed tube. Core

oods such as apples and peppers. Pack the food

in an upright position in the feed tube. The height

hould be slightly shorter than the feed tube.

sing the pusher, push down with an even

pressure whilst the machine is running.

hints

Use fresh ingredients.

Don’t cut food up too small. Fill the feed tube fairly

full, this prevents food from slipping sideways

during processing.

When slicing or shredding: food placed upright

comes out shorter than food placed horizontally.

After using a cutting plate there will always be a

small amount of waste on the plate or in the food.

Do not allow food to build up to the underside of

the plate - empty regularly.

Push food down the feed tube using an even

pressure.

maxi blend canopy

When blending, use the maxi blend canopy in

conjunction with the knife blade. It allows you to

increase the liquid processing capacity of the bowl

and improve the chopping performance of the

blade.

1 Place the canopy into the bowl over the knife

blade - do not push down .

2 Fit the lid .

citrus press

The citrus press is used to juice citrus fruit ie

oranges, lemons, limes and grapefruits.

1 Fit the bowl onto the processor. Add the strainer

and turn clockwise until the fin on the strainer

aligns with the mark on the processor body .

2 Attach the cone onto the drive shaft turning until it

drops all the way down .

3 Cut the fruit in half. Switch on and press the fruit

onto the cone.

care & cleaning

Always switch off and unplug before cleaning.

Handle blades and cutting plates with care - they

are extremely sharp.

Some foods may discolour the plastic. This is

perfectly normal and won’t harm the plastic or

affect the flavour of your food. Rub with a cloth

dipped in vegetable oil to remove the

discolouration.

power unit

ipe with a damp cloth, then dry. Ensure that the

nterlock area is clear of food debris.

Don’t immerse the power unit in water.

rap excess cord around the bracket at the back

f the appliance.

all other parts

Wash by hand, then dry.

Alternatively they can be washed on the top rack

of your dishwasher. A short low temperature

programme is recommended.

service & customer care

If the cord is damaged it must, for safety reasons,

be replaced by KENWOOD or an authorised

KENWOOD repairer.

If you need help with:

using your appliance or

servicing, spare parts or repairs

Contact the shop where you purchased your

appliance.

Designed and engineered by Kenwood in the UK.

Made in China.

IMPORTANT INFORMATION FOR CORRECT

DISPOSAL OF THE PRODUCT IN

ACCORDANCE WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product must not be

disposed of as urban waste.

It must be taken to a special local authority

differentiated waste collection centre or to a dealer

providing this service.

Disposing of a household appliance separately

avoids possible negative consequences for the

environment and health deriving from inappropriate

disposal and enables the constituent materials to be

recovered to obtain significant savings in energy and

resources. As a reminder of the need to dispose of

household appliances separately, the product is

marked with a crossed-out wheeled dustbin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood FP120 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info