Bedienungsanleitung Kenwood FPM910 Multipro Excel (Seite 9 von 139) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

706646

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

efore plugging in

●

Make sure your electricity supply is the same as the one

shown on the underside of your appliance.

●

This appliance conforms to EC directive 2004/108/EC on

lectromagnetic Compatibility and EC regulation no.

1935/2004 of 27/10/2004 on materials intended for contact

with food.

efore using for the first time

Remove the plastic blade covers from the knife blade. Take

care the blades are very sharp. These covers should

e discarded as they are to protect the blade during

anufacture and transit only.

2 Wash the parts see ‘care & cleaning’

key

processor

power unit

detachable drive shaft

Trïtan™ bowl

Trïtan™ lid

wide feed tube

pushers

safety interlocks

cord storage (at back)

power on light

auto button

speed/pulse control

weighing function (Type FPM91)

kg/lb button

display screen

on/zero button

weighing tray

thermoresist blender

filler cap

lid

goblet

sealing ring

blade unit

filler cap vents

A - standard attachments

knife blade

dough tool

dual whisk

folding tool

max capacity disc

4mm slicing disc

2mm slicing disc

4mm grating disc

2mm grating disc

attachment storage box

B - optional attachments

ot all the attachments listed below will be included with your

food processor model. Attachments are dependent upon the

odel variant. For more information or to order additional

ttachments refer to the “service and customer care” section.

extra fine grater disc (if supplied)

ine Julienne disc (if supplied)

decorative slicing disc (if supplied)

French fry disc (if supplied)

ini bowl and blade (if supplied)

compact chopper/grinder (if supplied)

citrus juicer (if supplied)

etal juicer extractor (if supplied)

to use your food processor

1 Fit the detachable drive shaft onto the power unit

– push

down lightly to ensure the drive shaft is fully engaged.

2 Then fit the bowl to the power unit. Place the handle

towards the back on the right hand side and turn clockwise

until it locks.

3 Fit an attachment over the bowl drive shaft.

●

Always fit the bowl and attachment onto the processor

before adding ingredients.

4 Fit the lid

- ensuring the top of the drive shaft/tool locates

into the centre of the lid.

5 Fit the pushers to the feed tube – turn the small pusher

clockwise to lock in position

●

The processor will not operate if the bowl, lid or

wide feed tube pusher are not fitted correctly

into the interlocks. Check that the feed tube and

bowl handle are situated to the right hand side.

6 Plug in. The Power On light will come on and flash until the

bowl and lid are fitted correctly. Select one of the following

options: -

Auto Button – the light will come on when the Auto Button is

pressed and the optimum speed for the attachment will be

automatically selected.

Speed Control – manually select the required speed (refer to

the recommended speed chart).

Pulse – use the pulse (P) for short bursts. The pulse will

operate for as long as the control is held in position.

7 At the end of processing turn the speed control to the ‘O’ off

position or if using the Auto press the button and the light

will go out.

●

The Power On light will flash if either the lid,

bowl or wide feed tube are not fitted.

●

The Power On and Auto lights will flash if the

Auto is selected but the interlocks are not

engaged.

●

The Auto Button will not operate if a speed is

selected on the speed control.

●

Always switch off and unplug before removing the

lid.

important

●

Your processor is not suitable for crushing or grinding coffee

beans, or converting granulated sugar to caster sugar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood FPM910 Multipro Excel Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info