Bedienungsanleitung Kenwood KDC-BT6044 (Seite 29 von 48) (Englisch, Holländisch)

121769

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

For how to select Function Control item, refer to

<Function Control> (page 6).

The current setting of PIN code is displayed.

2 Input the PIN code

Operation type Operation

Select the numbers. Turn the [AUD] knob or push it towards

up or down.

Move to the next digit. Push the [AUD] knob towards right.

Delete the last digit. Push the [AUD] knob towards left.

3 Register a PIN code

Press the [AUD] knob for at least 1 second.

If “COMPLETE” is displayed, registration is

completed.

4 Exit the PIN code edit mode

Press the [SEARCH] button.

⁄

• By default, "0000" is specified.

• A PIN code can be specified with up to eight digits.

Downloading the Phone Book

Download the phone book data from the cell-

phone to this unit so that you can use the Phone

Book of this unit.

To download automatically

If the cell-phone supports a phone book

synchronization function, the phone book is

downloaded automatically after Bluetooth

connection.

⁄

• Setting on the cell-phone may be required.

• If no phone book data is found in the unit even after

the compete display, your cell-phone may not support

automatic download of phone book data. In this case, try

downloading manually.

To download from the cell-phone manually

1 By operating the cell-phone, end the hands-free

connection.

2 By operating the cell-phone, send the phone

book data to this unit

By operating the cell-phone, download the phone

book data to this unit.

• During downloading:

“DOWNLOADING” is displayed.

• After completion of downloading:

“COMPLETE” is displayed.

3 By operating the cell-phone, start the hands-

free connection.

To clear the downloading completion message

Press any button.

⁄

• Up to 1000 phone numbers can be registered for each

registered cell-phone.

• Up to 32 digits can be registered for each phone number

along with up to 50* characters representing a name.

(* 50: Number of alphabetic alphabetical characters.

Fewer characters can be input depending on the type

of characters.)

• To cancel downloading of the phone book data, operate

the cell-phone.

Selecting the Bluetooth device You

Wish to Connect

When two or more Bluetooth devices have already

been registered, you need to select the Bluetooth

device you wish to use.

1 Enter Bluetooth device selection mode

Select “MENU” > “PHONE SEL”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

‘(name)’ is displayed.

2 Select the Bluetooth device

Turn the [AUD] knob or push it towards up or

down.

3 Set up the Bluetooth device

Push the [AUD] knob towards right or left.

'✱(name)' or '-(name)' is displayed.

"✱": The selected Bluetooth device is busy.

"-": The selected Bluetooth device is on standby.

" " (blank): The Bluetooth device is deselected.

4 Exit the Bluetooth device selection mode

Press the [SEARCH] button.

⁄

• If a cell-phone is already selected, deselect it, and then

select a different one.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT6044 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info