Bedienungsanleitung Kenwood KDC-BT6044 (Seite 31 von 48) (Englisch, Holländisch)

121769

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

Select “PB NAME CHK” (Play)

5 Press the [AUD] knob.

Play the registered voice and return to step 2.

Select “PB NAME DEL” (Delete)

5 Delete a voice tag

Press the [AUD] knob at least 1 second.

Return to step 2.

Exit the voice tag mode

Press the [SEARCH] button.

⁄

• Audio sound is not output during voice tag registration.

Setting a Voice Command for

Category

Add a voice tag to the phone number category

(type) for voice calling.

1 Enter voice tag mode

Select “MENU” > “VOICE TAG”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Select “PB TYPE EDIT” mode

Press the [AUD] knob to select “PB TYPE EDIT”,

and then press the [AUD] knob for at least 1

second.

3 Select the category (type) you wish to set

Turn the [AUD] knob or push it towards up or

down.

“GENERAL”/ “HOME”/ “OFFICE”/ “MOBILE”/ “OTHER”

4 Press the [AUD] knob.

5 Select a mode

Turn the [AUD] knob or push it towards up or

down.

Display Operation

“PB TYPE REG” Register a voice tag.

“RETURN” Return to step 2.

6 Register the category (type) by performing

steps 5 to 7 in <Adding a voice dialing

command> (page 30).

Exit the voice tag mode

Press the [SEARCH] button.

⁄

• Set the voice tag for all the 5 categories. If the voice tag

is not registered for all the categories, the Phonebook

may not be recalled by voice command.

SMS (Short Message Service)

The SMS arrived at the cell-phone is displayed on

the receiver.

A newly arrived message is displayed.

• To prevent car accidents, the driver should not read the

SMS while driving.

When a new message arrives

“SMS RECEIVED” is displayed.

The display disappears with any operations.

Displaying the SMS

1 Enter SMS Inbox mode

Select “MENU” > “SMS INBOX”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

A message list appears.

2 Select a message

Turn the [AUD] knob or push it towards up or

down.

• Each pressing of the [38] button for at least 1

second switches between telephone number or

name and message reception date.

3 Display the text

Press the [AUD] knob.

Pressing this button again allows you to select a

message again.

• Message Scroll

Continuously pushing the [AUD] knob towards

right or left scrolls the message.

4 Exit the SMS Inbox mode

Press the [SEARCH] button.

⁄

• The unopened message is displayed at the beginning

of the list. Other messages are displayed in the order of

reception.

• The SMS that has arrived when the cell-phone is not

linked with Bluetooth cannot be displayed. Download

the SMS.

• The short message cannot be displayed during

downloading the SMS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT6044 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info