Bedienungsanleitung Kenwood KDC-BT6144 (Seite 28 von 48) (Englisch, Holländisch)

121771

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U

Bluetooth Setup

Function of KDC-BT6544U/BT6544UY/BT6044/BT6144U

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable

with this unit, you need to register it (pairing). You

can register up to five Bluetooth devices to this unit.

When registering from Bluetooth devices

1 Turn on the control unit.

2 Start registering a unit by operating the

Bluetooth device

By operating the Bluetooth device, register the

hands-free unit (pairing). Select “KENWOOD BT

CD/R-3P2” from the list of connected units.

3 Enter a PIN code

Input the PIN code registered as mentioned in

<Registering PIN Code> (page 28).

Check that registration is complete on the

Bluetooth device.

4 By operating the Bluetooth device, start hands-

free connection.

When registering from this unit

1 Enter Bluetooth device registration mode

Select “MENU” > “DVC REGIST”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

Search for the Bluetooth device.

When search is completed, “FINISHED” is displayed.

2 Select the Bluetooth device

Turn the [AUD] knob or push it towards up or

down to select the Bluetooth device.

Press the [AUD] knob to determine the

selection.

3 Input the PIN code

Operation type Operation

Select the numbers. Turn the [AUD] knob or push it towards

up or down.

Move to the next digit. Push the [AUD] knob towards right.

Delete the last digit. Push the [AUD] knob towards left.

4 Transmit the PIN code

Press the [AUD] knob for at least 1 second.

If “PAIRING OK” is displayed, registration is

completed.

5 Return to the device list

Press the [AUD] knob.

6 Exit Bluetooth device registration

Press the [SEARCH] button.

⁄

• This unit allows up to eight digits to be input for a PIN

code. If a PIN code cannot be input from this unit, it can

be input from the Bluetooth device.

• If there are 5 or more Bluetooth devices registered, you

cannot register a new Bluetooth device.

• If the error message appears even though the PIN code

is correct, try <Registering Special Bluetooth device>

(page 28).

Registering Special Bluetooth device

Allow registration of a special device that cannot be

registered normally (pairing).

1 Enter special device registration mode

Select “MENU” > “S-DVC SELECT”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

A list is displayed.

2 Select a device name

Turn the [AUD] knob or push it towards up or

down to select a device name.

Press the [AUD] knob to determine the

selection.

If “COMPLETE” is displayed, registration is

completed.

3 Go through the procedure of <Registering

Bluetooth device> (page 28) and complete the

registration (pairing).

Cancelling special device registration mode

Press the [SEARCH] button.

⁄

• If the device name is not in the list, select “OTHER

PHONE”.

Registering PIN Code

By operating the Bluetooth device, specify the PIN

code necessary for registering this unit.

1 Enter PIN code edit mode

Select “MENU” > “PIN EDIT”.

Press the [AUD] knob for at least 1 second.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT6144 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-BT6144

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info