Bedienungsanleitung Kenwood KDC-BT6144 (Seite 30 von 48) (Englisch, Holländisch)

121771

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U

Bluetooth Setup

Function of KDC-BT6544U/BT6544UY/BT6044/BT6144U

Deleting a Registered Bluetooth

device

You can delete a registered Bluetooth device.

1 Enter Bluetooth device deletion mode

Select “MENU”

> “DEVICE DEL”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

‘(name)’ is displayed.

2 Select the Bluetooth device

Turn the [AUD] knob or push it towards up or

down.

3 Delete the selected Bluetooth device

Press the [AUD] knob for at least 1 second.

4 Exit the Bluetooth device deletion mode

Press the [SEARCH] button.

⁄

• When a registered cell-phone is deleted, its Phone Book,

log, SMS, and voice tag are also deleted.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1 Enter Bluetooth Firmware update mode

Select “MENU” > “BT F/W UPDATE”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

The firmware version appears.

2 Exit Bluetooth Firmware update mode

Press the [SEARCH] button.

⁄

• For how to update the firmware, access our website.

http://www.kenwood.com/bt/information/

Adding a voice dialing command

Add a voice tag to the phonebook for voice dialing.

You can register up to 35 voice tags.

1 Enter voice tag mode

Select “MENU”

> “VOICE TAG”.

Press the [AUD] knob for at least 1 second.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Select “PB NAME EDIT” mode

Press the [AUD] knob to select “PB NAME EDIT”,

and then press the [AUD] knob for at least 1

second.

3 Search for the name to register

Select the name to register with reference to 4 in

<Calling a number in the PhoneBook> (page 17).

If a voice tag has already been registered for a

name, “*” is displayed before the name.

4 Select a mode

Turn the [AUD] knob or push it towards up or

down.

Display Operation

“PB NAME REG” Register a voice tag.

“PB NAME CHK”* Play a voice tag.

“PB NAME DEL”* Delete a voice tag.

“RETURN” Return to step 2.

* Displayed only when a name for which a voice tag has

been registered is selected.

Select “PB NAME REG” (Regist)

5 Register a voice tag (first)

Press the [AUD] knob.

“ENTER1” is displayed.

When a beep is heard, utter a voice tag within 2

seconds.

6 Confirm the voice tag (second)

Press the [AUD] knob.

“ENTER2” is displayed.

When a beep is heard, utter the same voice tag as

that you uttered in step 4 within 2 seconds.

“COMPLETE” is displayed.

7 End registration

Press the [AUD] knob.

Return to step 2. You can register another voice tag

continuously.

⁄

• If your voice cannot be recognized, a message is

displayed. Pressing the [AUD] knob allows you to retry

voice input. (page 43)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT6144 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-BT6144

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info