Bedienungsanleitung Kenwood kdv 5244u (Seite 26 von 44) (Englisch)

168662

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544

Activating Security Code

When Security Code is set, possibility of theft

is reduced because input of Security Code is

prompted to turn on the unit once it is turned off.

⁄

• You can set the Security Code with a 4 digit number of your

choice.

• The Security Code cannot be displayed or referenced. Make

a note of the Security Code and treasure it up.

1 Select Standby

Press the [SRC] button.

Select the “STANDBY” display.

2 Enter Security Code mode

Press [ ] 1 sec., and select “MENU” > “CODE SET”.

Press the [AUD] knob for at least 1 second.

When “ENTER” is displayed, “CODE” is also displayed.

• For how to select Function Control items, refer to

<Function Control> (page 10).

3 Enter Security Code

Operation type Operation

Select the digits to enter Press the [

] or [

] button.

Select the Security Code

numbers

Turn the [AUD] knob, or press the

[FM+]/ [AM–] button.

4 Confirm the Security Code

Press the [AUD] knob for at least 3 seconds.

When “RE-ENTER” is displayed, “CODE” is also

displayed.

5 Do the step 3 through 4 operation, and reenter

the Security Code.

“APPROVED” is displayed.

The Security Code function activates.

⁄

• If you enter the wrong Code in steps 3 through 4, repeat

from step 3.

• When the Security Code function is activated, “CODE

SET” changes to “CODE CLR”.

• To deactivate the Security Code function, see the next

section <Deactivating Security Code>.

6 Exit Security Code mode

Press the [ ] button.

Deactivating Security Code

Deactivating the Security Code function.

1 Select Standby

Press the [SRC] button.

Select the “STANDBY” display.

2 Enter Security Code mode

Press [ ] 1 sec., and select “MENU” > “CODE CLR”.

Press the [AUD] knob for at least 1 second.

When “ENTER” is displayed, “CODE CLR” is also

displayed.

• For how to select Function Control items, refer to

<Function Control> (page 10).

3 Enter Security Code

Operation type Operation

Select the digits to enter Press the [

] or [

] button.

Select the Security Code

numbers

Turn the [AUD] knob, or press the

[FM+]/ [AM–] button.

4 Press the [AUD] knob for at least 3 seconds.

“CLEAR” is displayed.

The Security Code function deactivates.

5 Exit Security Code mode

Press the [ ] button.

⁄

• If a wrong security code is entered, “ERROR” is displayed.

Enter a correct security code.

Other Functions

Entering Security Code

The Security Code is required to use the audio unit

when the unit is first used after removed from the

battery power source or the Reset button is pressed.

1 Turn the power ON.

2 Do the step 4 through 5 operation, and enter

the Security Code.

“APPROVED” is displayed.

Now, you can use the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdv 5244u Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdv 5244u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info