Bedienungsanleitung Kenwood kdv 5244u (Seite 27 von 44) (Englisch)

168662

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English

Audio Control

You can adjust following Audio Control items ;

Adjustment Item Display Range

Rear volume “R-VOL” 0 — 35

AV output volume “AVVOL” 0 — 35

Subwoofer level “SW L” –15 — +15

Balance “BAL” Left 15 — Right 15

Fader “FAD” Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

1 Select the source to adjust

Press the [SRC] button.

2 Enter Audio Control mode

Press the [AUD] knob.

3 Select the Audio item to adjust

Press the [AUD] knob.

4 Adjust the Audio item

Turn the [AUD] knob.

5 Exit Audio Control mode

Press any button.

Press a button other than the [AUD] knob or [0]

button.

Audio Adjustments

• AV output source

The sub source (DVD, USB, and AV IN) can be output to

the AV output separately from the main source.

- Set the preout to “AV” in “MENU” > “SWPRE” (page 11) of

<Function Control>.

- Adjust the volume of AV output source by <Audio

Control> (page 27).

- “USB” and “DVD” cannot be set at the same time for the

main and AV output sources.

• Dual Zone System and the AV output source cannot

be used at the same time. Turn off the setting currently

used and then set the next function.

1 Select the source to adjust

Press the [SRC] button.

2 Enter Audio Setup mode

Press the [AUD] knob for at least 1 second.

3 Select the Audio Setup item to adjust

Press the [AUD] knob.

4 Adjust the Audio setup item

Turn the [AUD] knob.

5 Exit Audio Setup mode

Press the [AUD] knob for at least 1 second.

Audio Setup

You can set Sound system, such as follows;

Adjustment Item Display Range

Volume offset “V-OFF” –8 — ±0 (AV IN: -8— +8)

Dual Zone System “2ZON” OFF/ DVD/ USB/ AV IN

AV output source “AV/O” OFF/ DVD/ USB/ AV IN

⁄

• Volume offset: Sets each source’s volume as a difference

from the basic volume.

• Dual Zone System

Main source and sub source (DVD, USB, AV IN) output

Front channel and Rear channel separately.

- Set the preout to “R” or “SW” in “MENU” > “SWPRE” (page

11) of <Function Control>.

- Set up the channel of sub source by “ZONE2” of

<Function Control> (page 11).

- Select Main source by [SRC] button.

- Adjust the volume of Front channel by [AUD] knob.

- Adjust the volume of Rear channel by <Audio

Control> (page 27) or [5]/[∞] button on the remote

control (page 32).

- The Audio Control has no effect on sub source.

- “USB” and “DVD” cannot be set at the same time for the

main and sub sources.

Preset Equalizer Select

You can select following Equalizer curve;

Preset Equalizer Display

User* “USER”

Rock “ROCK”

Pops “POPS”

Easy “EASY”

Top 40 “TOP40”

Preset Equalizer Display

Jazz “JAZZ”

Game “GAME”

iPod (During iPod

source only)

“iPod”

Natural “NATURAL”

* The Equalizer curve set in the section <Manual Equalizer

Control> is recalled.

1 Enter Preset Equalizer mode

Press [ ] 1 sec., and select “DSP” > “CONTROL” >

“EQ” > “PRESET”.

Press the [AUD] knob.

• For how to select Function Control items, refer to

<Function Control> (page 10).

2 Select the Equalizer curve

Turn the [AUD] knob and push the center when

the desired item is displayed.

You can select from 22 Equalizer curve types for

iPod when “iPod” is selected.

Next page 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdv 5244u Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdv 5244u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info