Bedienungsanleitung Kenwood p 110 (Seite 3 von 8) (Englisch)

161807

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

P-110 (En)

AC voltage selection

This unit operates on 110-120 or 220-240 volts AC . The AC volt-

age selector switch under the motor pulley cover is set to the

voltage that prevails in the area to which the unit is shipped. Be-

fore connecting the power cord to your AC outlet, make sure that

the setting position of this switch matches your line voltage. If

not, it must be set to your voltage in accordance with the following

direction.

Note:

Our warranty does not cover damage caused by excessive line

voltage due to improper setting of the AC voltage selector switch.

AC voltage selector switch

For the United Kingdom

Factory fitted molded mains plug

1. The mains plug contains a fuse. For replacement, use only a 5-

Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the

molded plug.

3. Do not cut off the mains plug from this equipment. If the plug

fitted is not suitable for the power points in your home or the

cable is too short to reach a power outlet, then obtain an ap-

propriate safety approved extension lead or adapter, or con-

sult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and

dispose of the plug immediately, to avoid a possible shock

hazard by inadvertent connection to the mains supply.

IMPORTANT:

The wires in the mains lead are coloured in accordance with

the following code:

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin

plug.

Before applying power

Units are designed for operation as follows.

U.S.A. and Canada ...................................................... AC 120 V only

Europe and U.K. .......................................................... AC 230 V only

Australia ....................................................................... AC 240 V only

*Other countrues ...................... AC 110-120/ 220-240 V switchable

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

For other countries

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED

TO ALERT THE USER OF THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE

PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC

SHOCK TO PERSONS.

THE EXCLAMATION MARK WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER OF THE

PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERA-

TURE ACCOMPANYING THE APPLIANCE.

The following informations are on the rear.

1. Trade mark.

2. Model number.

3. The double square symbol.

4. Rated supply voltage.

5. Rated mains frequency.

6. Nature of supply.

Move switch lever to match your line

voltage with a small screwdriver or other

pointed tool.

Safety precautions

Caution : Read this page carefully to ensure safe operation.

SPEED

CUT

220-240V

110-120V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood p 110 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info