Bedienungsanleitung Kenwood p 110 (Seite 5 von 8) (Englisch)

161807

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

P-110 (En)

13. Lightning - For added protection for this appliance during a lightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the appliance due to lightning

and power-line surges.

14. Abnormal smell - If an abnormal smell or smoke is detected, imme-

diately turn the power OFF and unplug the appliance from the wall

outlet. Contact your dealer or nearest service center.

15. Damage requiring service - The appliance should be serviced by

qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by following the

instruction manual. Adjust only those controls that are covered by the

instruction manual as an improper adjustment of other controls may

result in damage and will often require extensive work by a qualified

technician to restore the appliance to its normal operation.

E. The appliance has been dropped, or the enclosure damaged.

F. The appliance exhibits a marked change in performance.

16. Servicing - The user should not attempt to service the appliance be-

yond that described in the instruction manual. All other servicing should

be referred to qualified service personnel.

17. Outdoor antenna grounding - If an outside antenna is connected to

the appliance, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built up static charges.

Article 810 of the National Electrical Code ANSI/ NFPA 70, provides

information with respect to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements for the grounding

electrode. See Figure.

18. Power lines - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be

fatal.

19. Overloading - Do not overload wall outlets, extension cords, or inte-

gral convenience receptacles as this can result in a risk of fire or elec-

tric shock.

20. Attachment - Do not use attachments not recommended by the ap-

pliance manufacturer as they may cause hazards.

21. Replacement parts -When replacement parts are required, be sure

the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

22. Safety check - Upon completion of any service or repairs to this ap-

pliance, ask the service technician to perform safety checks to deter-

mine that the appliance is in proper operating condition.

Notes:

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with antenna

terminals.

3. Item 17 complies with UL in the U.S.A.

POWER OFF!

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMPS

GROUND CRAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Caution : Read this page carefully to ensure safe operation.

IMPORTANT SAFEGUARDS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood p 110 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info