606703
69
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
APRS – 26
DX PACKETCLUSTERS MONITOR
DX PacketClusters are networks which consist of nodes
and stations who are interested in DXing and contesting.
If one station finds a DX station on the air, they will
send a notice to their node. This node then passes the
information to its local stations through another node.
The DX PacketCluster monitor function receives the
packet data of the DX cluster and displays the contents.
This transceiver can retain the latest information on up
to 10 DX stations, but the memory will be cleared when
the transceiver power supply is turned Off. If you have
a TS-590S, TS-480HX/SAT, TS-2000/X, TS-570S/D, or
TS-870S HF transceiver, you can connect the TH-D72
to the HF transceiver to use the DX PacketCluster Tune
function. You can use this function to monitor the latest
DX information in your area, be it cannot be used to send
DX information to a node.
Node
Node
Node
Station
1 Access Menu 310 (Int. TNC - Data Band) to select
band A or B.
If the common transfer rate in your local PacketCluster
network is 9600 bps, access Menu 311 (Int. TNC - Data
Speed) and select “9600 bps”.
2 Tune to the frequency of the target PacketCluster
node.
3 Press [TNC] to enter APRS mode.
“APRS” should appear.
4 Press [F], [LIST].
Each time new DX cluster data is received, a callsign,
frequency, and time are displayed.
When a duplicate DX cluster data is received, “DX” and a
callsign are displayed.
5 Press [ OK].
DX station detailed display mode
Press [ESC ]: Restores the frequency display.
Press [MENU]: Outputs the PCT data.
Note: The Packet Cluster data (PCT) is output only when Menu
No.311-COM Port-input is set to “Off”.
Connecting TH-D72 with the HF Transceiver
In order to connect TH-D72 to the HF transceiver, you
need to prepare three cables by yourself.
The COM terminal on this transceiver accepts a 2.5
mm (1/10") 3-conductor plug. If necessary, use the
cable (service part: E30-3400-XX) to modify the cable
end of RS-232-C connector.
Attach the line filter to the cable.
Line Filter
Connect pins 7 and 8
HF transceiver
COM connector on HF
transceiver
TH-D72
2.5 mm (1/10") 3-conductor plug
9-pin D-SUB connector
(solder side)
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TH-D72A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TH-D72A

Kenwood TH-D72A Bedienungsanleitung - Deutsch - 156 seiten

Kenwood TH-D72A Bedienungsanleitung - Deutsch - 75 seiten

Kenwood TH-D72A Bedienungsanleitung - Englisch - 156 seiten

Kenwood TH-D72A Bedienungsanleitung - Holländisch - 156 seiten

Kenwood TH-D72A Bedienungsanleitung - Holländisch - 73 seiten

Kenwood TH-D72A Bedienungsanleitung - Französisch - 156 seiten

Kenwood TH-D72A Bedienungsanleitung - Französisch - 76 seiten

Kenwood TH-D72A Bedienungsanleitung - Italienisch - 156 seiten

Kenwood TH-D72A Bedienungsanleitung - Spanisch - 156 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info