Bedienungsanleitung Kenwood TH-F7E (Seite 23 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

6 MEMORY CHANNELS

MEMORY CHANNEL GROUPS

400 memory channels have been divided into

8 groups of 50. Group 0 contains memory channel

numbers 0 ~ 49, group 1 is 50 ~ 99, group 2 is 100 ~

149, and so on. You can categorize each group to

store similar data, same frequency bands or same

modes for ease of use.

#puorG lennahCyromeM #puorG lennahCyromeM

0puorG94~04puorG942~002

1puorG99~055puorG992~052

2puorG941~0016puorG943~003

3puorG991~0517puorG993~053

RECALLING A MEMORY CHANNEL USING

MEMORY GROUP FUNCTION

It is sometimes a tedious endeavor to scroll through

400 memory channels sequentially. However, using a

Group memory recall function, you can access your

desired memory channel numbers more quickly.

1 Press [MR] to enter Memory Recall mode.

2 While pressing and holding [LAMP], turn the

Tuning control to select a group.

• Each click of the Tuning control, the lowest

memory channel number of each group is

recalled. For example, if you have the following

memory channels that contain data:

#puorG ataDniatnoCtahtslennahCyromeM

0puorG0201510354

1puorG0516568789

2puorG301111321

3puorG251661

4puorG

5puorG062082

6puorG503223333543

7puorG993

Memory channels 0, 50, 103, 152, 260, 305, 399,

and then 0 are recalled sequentially while pressing

and holding [LAMP].

3 Release [LAMP] and turn the Tuning control to

select the desired memory channels within the

selected group.

Note: If you have configured Menu No. 3 (MR METHOD) as

“CURRENT BAND” {page 16}, only memory channels that have the

same frequency band data are recalled.

ERASING MEMORY CHANNELS USING MEMORY

GROUP DELETE FUNCTION

Instead of erasing each unnecessary channel one by

one, you can erase an entire group of memory

channels at once. For example, if you erase group 2

memory channels, all the data in memory channels

100 ~ 149 are erased.

1 Press [MR].

• Turn the Tuning control or press [ ]/ [ ] to

select a memory channel in the group you want

to erase (for example, memory channel

No. 111, in Group 2).

2 Press [ ] (POWER) to turn the transceiver OFF.

3 Press [MHz]+[ ] (POWER).

• An erase confirmation message appears.

4 Press [MR] ([ ] or [MNU]) to proceed.

Otherwise, press any other key to cancel the

erase.

MEMORY CHANNEL TRANSFER

MEMORY \ VFO TRANSFER

After retrieving frequencies and associated data from

Memory Recall mode, you can copy the data to the

VFO. This function is useful, for example, when the

frequency you want to monitor is near the frequency

stored in a memory channel.

1 Press [MR], then turn the Tuning control to recall

a desired memory channel.

2 Press [F], [VFO] to copy the memory channel

data to the VFO.

Note:

◆

To copy an odd-split channel data {page 15}, turn the Reverse

function ON {page 14} before performing the transfer.

◆

You can also transfer the Program Scan memory channels

(L0/U0 ~ L9/U9), Priority Channels (Pr1 and Pr2), and

Information Channels (I–0 ~ I–9) to the VFO.

CHANNEL \ CHANNEL TRANSFER

You can also copy channel information from one

memory channel to another. This function is useful

when storing frequencies and associated data that

you temporarily change in Memory Recall mode.

1 Press [MR], then turn the Tuning control to recall

a desired memory channel.

2 Press [F].

3 Select the memory channel where you would like

the data copied, using the Tuning control.

4 Press [MR] ([ ] or [MNU]).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info