Bedienungsanleitung Kenwood TH-F7E (Seite 21 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

6 MEMORY CHANNELS

RECALLING A MEMORY CHANNEL

There are 2 ways of recalling the desired memory

channel.

■ Using the Tuning Control or / Keys

1 Press [MR] to enter Memory Recall mode.

• The memory channel used last is recalled.

2 Turn the Tuning control or press [ ]/ [ ] to

select your desired memory channel.

• You cannot recall an empty memory

channel.

• To restore VFO mode, press [VFO].

Note: If the “CURRENT BAND” is selected for Menu No. 3 (MR

METHOD), only memory channels that have the same band data

can be recalled {below}.

■ Using a Numeric Keypad

You can also recall a memory channel by entering

a desired memory channel number with the

keypad.

1 Press [MR] to enter Memory Recall mode.

2 Press [ENT], then enter the channel number

using 3 digits.

• For example, to recall channel 12, press

[ENT], [0], [1], [2].

• You can shorten the entry for memory

channels that are less than 100 by pressing

[ENT] after entering the channel number.

For example, to recall memory channel 9,

press [ENT], [9], [ENT].

Note:

◆

You cannot recall an empty memory channel. An error beep

sounds.

◆

You cannot recall the Program Scan memory channels

(L0/U0 ~ L9/U9), Priority channels (Pr1 and Pr2), and

Information Channels (I–0 ~ I–9), using the numeric keypad.

◆

When you recall an odd-split memory channel, “+” and “–”

appear on the display. Press [REV] to display the transmit

frequency.

◆

After recalling a memory channel, you may modify data such

as Tone or CTCSS. These settings, however, are cleared

once you select another channel or the VFO mode. To

permanently store the data, overwrite the channel contents

{page 15}.

CLEARING A MEMORY CHANNEL

To clear an individual memory channel:

1 Recall the memory channel you want to erase.

2 Press and hold [ ] (POWER) to switch the

transceiver OFF.

3 Press [MR]+[ ] (POWER).

• An erase confirmation message appears.

4 Press [MR] ([ ] or [MNU]) to erase the channel

data.

• The contents of the memory channel are

erased.

• To quit clearing the memory channel, press any

key other than [MR], [ ] and [MNU].

Note:

◆

If you clear the information channel data, the data will be set to

the factory default values.

◆

You can also clear the Priority channel data and L0/U0 ~ L9/U9

data.

◆

To clear all memory channels contents, perform the Full Reset

{page 50}.

MEMORY RECALL MODE

Since the transceiver has more than 400 memory

channels, it sometimes takes time to search for your

desired memory channel. By default, the transceiver

can recall all memory channels when [MR] is

pressed, regardless of the current operating band.

However, you can configure the transceiver to recall

only the memory channels that have the same band

information. For example, when you operate on the

2 m band in VFO mode, pressing [MR] recalls only

the memory channels that have 2 m band

information. To change the memory recall mode:

1 Press [MNU].

2 Turn the Tuning control or press [ ]/ [ ] to select

Menu No. 3 (MR METHOD).

3 Press [ ] or [MNU].

4 Turn the Tuning control or press [ ]/ [ ] to select

“CURRENT BAND”.

5 Press [ ] or [MNU] to store the setting.

Otherwise, press [ ] or [PTT] to cancel.

When you press [MR] in VFO mode, only memory

channels that have the same band data are recalled.

To return to the default memory recall mode, repeat

step 1 to 5 {above} and select “ALL BANDS” in

step 4.

Note:

◆

All Information Channels are recalled regardless of Memory

Recall mode selection.

◆

Memory Recall mode selection does not change the Memory

Group scan channels {page 24} .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info