Bedienungsanleitung Kenwood TH-F7E (Seite 20 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

MEMORY CHANNELS

In memory channels, you can store frequencies and

related data that you often use. Then you need not

reprogram those data every time. You can quickly

recall a programmed channel through simple

operation. A total of 400 memory channels are

available for storing the frequencies, modes and

other operating conditions of the A and B-bands.

SIMPLEX & REPEATER OR

ODD-SPLIT MEMORY CHANNEL?

You can use each memory channel as a simplex &

repeater channel or an odd-split channel. Store only

one frequency to use as a simplex & repeater

channel or two separate frequencies to use as an

odd-split channel. Select either application for each

channel depending on the operations you have in

mind.

Simplex & repeater channels allow:

• Simplex frequency operation

• Repeater operation with a standard offset

(if an offset direction is stored)

Odd-split channels allow:

• Repeater operation with a non-standard offset

Note: Not only can you store data in memory channels, but you can

also overwrite existing data with new data.

The data listed below can be stored in each memory

channel:

retemaraP

&xelpmiS

retaepeR

tilpS-ddO

ycneuqerfevieceR

seY

ycneuqerftimsnarTseY

ycneuqerfenoTseYseY

NOenoTseYseY

ycneuqerfSSCTCseYseY

NOSSCTCseYseY

edocSCDseYseY

NOSCDseYseY

noitceridtesffOseYA/N

ycneuqerftesffOseYA/N

NOesreveRseYA/N

ezispetsycneuqerFseYseY

tuokcollennahcyromeMseYseY

emanlennahcyromeMseYseY

NOgninutENIFseYseY

noitcelesedoMseYseY

Yes: Can be stored in memory.

N/A: Cannot be stored in memory.

Note: The transmit frequency must be on the same band as the

receive frequency band (Odd-split channel).

STORING SIMPLEX FREQUENCIES OR

STANDARD REPEATER FREQUENCIES

1 Press [VFO].

2 Turn the Tuning control or press [ ]/ [ ] to select

your desired frequency in the amateur radio

bands.

• You can also directly enter desired frequency

using the keypad {page 7}.

3 If storing a standard repeater frequency, select the

following data:

• Offset direction {page 12}

• Tone function, if necessary {page 13}

• CTCSS/ DCS function, if necessary

{pages 28, 29}

If storing a simplex frequency, you may select

other related data (CTCSS or DCS settings, etc.).

4 Press [F].

• A memory channel number appears and blinks.

•“” indicates the current channel is empty; “ ”

appears if the channel contains data.

• Memory channel number L0/U0 ~ L9/U9

{page 23}, I–0 ~ I–9 {page 20}, and Pr1 and

Pr2 {page 25} are reserved for other functions.

5 Turn the Tuning control or press [ ]/ [ ] to select

the memory channel in which you want to store

the data.

6 Press [MR] ([ ] or [MNU]) to store the data to the

channel.

STORING ODD-SPLIT REPEATER FREQUENCIES

Some repeaters use a receive and transmit frequency

pair with a non-standard offset. If you store two

separate frequencies in a memory channel, you can

operate on those repeaters without programming the

offset frequency and direction.

1 Store the desired receive frequency and related

data by the procedure given for simplex or

standard repeater frequencies {above}.

2 Turn the Tuning control or press [ ]/ [ ] to select

the desired transmit frequency.

3 Press [F].

4 Turn the Tuning control or press [ ]/ [ ] to select

the memory channel you programmed in step 1.

5 Press [PTT]+[MR] ([PTT]+[ ] or [PTT]+[MNU]).

• The transmit frequency is stored in the memory

channel.

Note:

◆

When you recall an odd-split memory channel, “+” and “–” appear

on the display. To confirm the transmit frequency, press [REV].

◆

When you revise only the transmission frequency for the odd-split

channel, the frequency step size must be the same as the

original odd-split channel memory data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info