Bedienungsanleitung Kenwood TH-F7E (Seite 36 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

DTMF FUNCTIONS

The keys on the keypad also function as DTMF keys;

the 12 keys found on a touch-tone phone plus

4 additional keys (A, B, C, D). This transceiver also

provides 10 dedicated DTMF memory channels. You

can store a DTMF number (16 digits max.) with a

memory name (8 digits max.) in each of the channels

to recall later for speed dialing.

Many repeaters in the U.S.A. and Canada offer a

service called Autopatch. You can access the public

telephone network via such a repeater by sending

DTMF tones. For further information, consult your

local repeater reference.

MANUAL DIALING

Manual Dialing requires only two steps to send DTMF

tones.

1 Press and hold the PTT switch to transmit.

2 While transmitting, press the keys in sequence on

the keypad to send DTMF tones.

• The corresponding DTMF tones are

transmitted and monitored through the speaker.

• While pressing keys on the keypad, the

transceiver remains in the TX mode. You do

not have to press [PTT] at the same time.

.qerF

)zH(

9021 6331 7741 3361

796

123A

077

456B

258

789C

149

0#D

DTMF TX HOLD

This function causes the transceiver to remain in

transmit mode for 2 seconds after you release each

key. So, you can release the PTT switch while

sending the DTMF tones.

1 Press [MNU] to enter Menu mode.

2 Turn the Tuning control or press [ ]/ [ ] to select

Menu No. 12 (DTMF HOLD).

3 Press [ ] or [MNU].

4 Turn the Tuning control or press [ ]/ [ ] to select

“ON”.

5 Press [ ] or [MNU] to store the setting.

Otherwise, press [ ] or [PTT] to cancel.

AUTOMATIC DIALER

If you use the 10 dedicated memory channels to store

DTMF numbers, you need not remember a long string

of digits.

STORING A DTMF NUMBER IN MEMORY

Note: Audible DTMF tones from other transceivers near you (or from

your own speaker) may be picked up by your microphone. If so, you

may fail to correctly program a DTMF number.

1 Press [MNU] to enter Menu mode.

2 Turn the Tuning control or press [ ]/ [ ] to select

Menu No. 10 (DTMF STORE).

3 Press [ ] or [MNU].

4 Turn the Tuning control or press [ ]/ [ ] to select

your desired DTMF memory channel number from

0 to 9.

5 Press [ ] or [MNU].

• The display for entering a memory name

appears; the first digit blinks.

• To skip naming the channel, press [ ] or

[MNU] again; jump to step 9.

6 Turn the Tuning control or press [ ]/ [ ] to select

a character. Refer to “NAMING A MEMORY

CHANNEL” {page 17} for the available characters

and the input method.

• You can enter alphanumeric characters plus

special ASCII characters.

• Press [MONI] to delete the charactor at the

cursor.

• You can also use the numeric keypad to enter

a character (special ASCII characters are not

available). For example, each press of [2]

switches entry as a, b, c, 2, A, B, C and then

back to a.

• While pressing and holding [LAMP], turn the

Tuning control to jump to the first character of

each ASCII character group {page 17}.

7 Press [ ] to move the cursor to the next digit.

8 Repeat steps 6 and 7 to enter up to 8 digits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info