Bedienungsanleitung Kenwood TM-D710GA (Seite 26 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

EchoLink

WHAT IS EchoLink?

EchoLink allows you to communicate with other amateur radio stations over the internet, using VoIP (voice-over-IP) technology. The

EchoLink

software program allows worldwide connections to be made between stations, or from computer to station, greatly enhancing

your communications capabilities.

To use EchoLink, you must register using your callsign on their website and download the EchoLink software program (free of charge).

Refer to the website for PC hardware and other requirements.

Ofﬁ cial EchoLink Website: http://www.echolink.org

Note: EchoLink is a registered trademark of Synergenics, LLC.

STORING EchoLink MEMORY

There are 10 dedicated EchoLink DTMF Memory channels

available. You can store up to 8 digits in each channel.

1 Enter Menu mode and access Menu 204.

2 Rotate the Tuning control to select an EchoLink channel

number from EL0 ~ EL9.

3 Press the Tuning control to set the selected channel number.

• The name entry display appears.

4 Enter the name for the channel, then press the Tuning

control to set it.

• The callsign and conference name (for board rooms that can

do round QSO) of the other station which is connected via

EchoLink, or the control command name, etc., are entered into

the EchoLink memory name.

• The code entry display appears.

5 Enter a DTMF code for the channel, then press the Tuning

control to set it.

• The node number of the other station and conference which

are connected via EchoLink, or the DTMF code of the control

command, etc., are entered into the EchoLink code.

■ Transmitting EchoLink Memory

1 Press and hold the microphone [PTT].

2 While transmitting, press the Tuning control.

• The last called EchoLink DTMF Memory channel name and

number appears on the display.

3 While still transmitting, rotate the Tuning control to select

your desired EchoLink Memory channel, then press the

Tuning control to set the channel.

• The stored code scrolls across the display and is transmitted.

Note:

◆ In step 2, press the microphone [C] key before pressing the Tuning

control, to transmit the converted DTMF code of the EchoLink “Connect by

Call” function. (example: JA1YKX)

“C” “51 21 10 93 52 92 #” (# is automatically added to the end of the DTMF

code)

◆ In step 2, press the microphone [0] [7] keys before pressing the Tuning

control, to transmit the converted DTMF code of the EchoLink “Query by

Call” function. (example: JA1YKX)

“0” “7” “51 21 10 93 52 92 #” (# is automatically added to the end of the

DTMF code)

◆ When only the EchoLink memory name has been registered, the EchoLink

“Connect Call” function transmits the converted DTMF code. (example:

JA1YKX)

“C 51 21 10 93 52 92 #” (C is automatically added to the beginning of

the DTMF code and # is automatically added to the end)

◆ Callsign/ DTMF Code Conversion Table

When a character other than an alphanumeric character is used (such as

“-” and “/”), the DTMF conversion stops at the character before that non-

standard character.

1234567890

QADGJMPTW

ZBEHKNRUX

CF I LOSVY

EchoLink-1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info