606707
46
Zoom out
Zoom in
Vorherige Seite
1/77
Nächste Seite
APRS-1
APRS
®
APRS DATA COMMUNICATION (APRS BEACON)
This function uses the APRS format for data communications including your station position, messages, etc.
When data is received from another station, the direction of the received station (from your station’s perspective), their distance, and their grid
square locator is displayed. Any comments sent by the other station are also displayed.
Meteorological data obtained from a connected Weather Station can be transmitted.
APRS (Automatic Packet Reporting System) is a worldwide system introduced by Bob Bruninga, WB4APR .
< APRS
®
is a software program and registered trademark of Bob Bruninga, WB4APR.>
Offi cial APRS Website: http://www.aprs.org
NAVITRA DATA COMMUNICATION (NAVITRA BEACON)
The Navitra system was introduced by KENWOOD in the 1990’s, for use within Japan.
CALLSIGN AND BEACON TYPE SETTINGS
When an APRS/NAVITRA beacon is created, set the callsign and beacon type (APRS/NAVITRA) (Menu No. 600).
SSID (Secondary Station IDentifi ers) can be added to the end of your callsign (for example, W6DJY will become W6DJY– 14).
SSIDs can range from “None, – 1” to “– 15”, so that each callsign can have up to 16 settings.
Refer to the website for SSID: http://aprs.org/aprs11/SSIDs.txt (as of October 2013)
DIGIPEAT
The term digipeat means that the packet data is relayed. When a digipeater (relay station) receives a packet, it saves it to memory. When the
reception ends, the data is re-transmitted. Using digipeat, it is possible to send beacons long distances.
In order to perform a digipeat, you must set up a packet path (Menu No. 612). For the packet path, you can specify a direct callsign or you can
use “WIDE1-1” or “WIDE1-1, WIDE2-1”, specifying a common alias and hops number. Set the transceiver’s packet path according to the digipeater
settings.
Digipeat is very useful in reaching other stations when you have a weak signal. However, you need to set up the total hops numbers and beacon
transmissions moderately to prevent channel congestion.
WIDE type
WIDE type:
This degipeater can send the packet over a wide area.
Fill-in type:
Regional degipeaters are also called “RELAY type” relays. These
degipeaters are used for mobile stations when a signal cannot
reach a WIDE-type degipeater.
Fill-in type
Fill-in type
WIDE type
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TM-D710GA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TM-D710GA

Kenwood TM-D710GA Bedienungsanleitung - Deutsch - 74 seiten

Kenwood TM-D710GA Bedienungsanleitung - Englisch - 55 seiten

Kenwood TM-D710GA Bedienungsanleitung - Holländisch - 75 seiten

Kenwood TM-D710GA Bedienungsanleitung - Holländisch - 55 seiten

Kenwood TM-D710GA Bedienungsanleitung - Französisch - 77 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info