Bedienungsanleitung Kenwood TM-D710GA (Seite 51 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-6

DISPLAY FILTER FUNCTION

This function allows you to display only the speciﬁ ed types of

data from the station list.

1 Display the station list.

2 Press [FILTER].

• The ﬁ lter type list appears on the display.

3 Select a ﬁ lter type.

4 Press the Tuning control.

• “FILTERING” appears on the display and ﬁ ltering begins.

DIGIPEATER

Only Digipeater Stations are displayed.

WEATHER Only Weather Stations are displayed.

MOBILE Only Mobile Stations are displayed.

OBJECT Only Object Stations are displayed.

KENWOOD

Only KENWOOD TH-D7, TH-

D72,TM-D700, TM-D710G, TM-D710,

and RC-D710 Stations are displayed.

NAVITRA

Only Navitra Stations starting from

$PNTS are displayed.

FREQUENCY

(QSY)

Only stations containing frequency

(QSY) data are displayed.

OTHERS

Stations other than those listed above

are displayed.

ALL(OFF)

The ﬁ ltering function is cancelled,

displaying all stations.

5 The newly ﬁ ltered station list appears on the display.

• After the display ﬁ lter function is turned ON, received data is added

to the list but will on be displayed if it matches the ﬁ lter type selected.

• For example, with the station list displayed and the display ﬁ lter

selection set to “WEATHER”, all stations not relating to weather are

no longer displayed. If mobile station data is received at this time,

the new data will also not be displayed as long as the weather ﬁ lter is

active.

RECEIVING A MESSAGE

Each time a proper message is received, the frequency display is

interrupted to show information as below:

a: Indicator

b: Callsign (TX)

c: Receive time

d: Message

e: TX/RX date

f: Line number

• The display shows up to 67 characters of the message.

• “

01” will appear to indicate the number of messages not yet read.

• The following indicators appear depending on the types of received

messages:

Indicator Meaning

Message addressed to you

B Bulletin message

! Report by the National Weather Service

Reception acknowledgment (or rejection) to

your message

G Message group

• “ XX” appears on the display when you have an unread message

(where XX is the number of unread messages). When you verify

the reception of a message (by pressing the Tuning control), the

message is marked as read. For each message you view, then

number (XX) decreases by 1. When only 1 message is unread (“

01”), viewing this message will cause the icon to be removed from

the display. (When you enter the message list display and select a

message designated as unread by the “ XX” mark, the message

will be marked as read.)

• When a duplicate message from the same station is received,

the reception interrupt display does not appear and an error tone

sounds. When the frequency at that time appears on the display,

“dM”(duplicate Message) and the calling station's callsign appears on

the display.

Note:

◆ This transceiver allows you to receive a message also when the SSID does not

match. However, it will not return a reception acknowledgment.

◆ The dedicated memory is used for storing both incoming and outgoing

messages. Receiving a new message when the memory is full causes the

oldest message to be deleted. A message not yet transmitted 5 times may be

unexpectedly deleted. If the oldest message has not been accessed using the

List function when memory is full, a new message does not replace the oldest

message. This transceiver will return a reject command and display “rM”.

◆ This transceiver beeps each time it receives any type of APRS packet. You

may access Menu 624 (SOUND-RX BEEP) to change this setting. The

default is “ALL”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info