Bedienungsanleitung Kenwood TM-D710GA (Seite 53 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-8

[CLR]: Cancels further transmissions of the current

message.

The table below shows the meanings of the symbols to be

shown in step 2.

aMeaning

Message addressed to you

B Bulletin message

! Report by the National Weather Service

bRX or TX?



Received message (or bulletin)



A message (or bulletin) for transmitting

Status

“n” indicates the remaining number of times

for transmitting the message (or bulletin).

A message for which a reception

acknowledgment was returned

A message (or bulletin) transmitted

5 times (For a message, a reception

acknowledgment was not returned.)

These indicators appear for outgoing messages (or bulletins).

TRANSMITTING A MESSAGE

When you press [SEND] on the “MESSAGE LIST” display, the

remaining messages on the Message List will be transmitted.

After entering a message on the message display, pressing the

Tuning Control will cause it to transmit every minute.

BASIC SETTINGS

Enter Menu mode and access Menu 600.

■ My Callsign <MY CALLSIGN>

Program your callsign using a maximum of 9 alphanumeric

characters. You may include SSID characters in the string.

Unless you program a callsign, you cannot transmit APRS

packets.

1 Select MY CALLSIGN.

• The display for entering a callsign appears; the ﬁ rst digit

blinks. The default is “NOCALL”.

2 Rotate the Tuning control to select the ﬁ rst digit.

• You can enter 0 to 9, A to Z, and –.

3 Press the Tuning control.

• The cursor moves to the next digit.

4 Repeat steps 2 and 3 to enter up to 9 digits.

Note: When all settings are blank, “NOCALL” is automatically set. In this

case, the Position packet or Message packet cannot be transmitted.

■ Beacon Type <BEACON TYPE>

[APRS]: Beacons are transmitted in APRS format when

the “APRS” icon appears on the upper left of the display.

Additionally, in Menu mode, only those menus which can be

set with APRS are displayed.

[NAVITRA]: Beacons are transmitted in NAVITRA format

when the “NAVITRA” icon appears on the upper left of the

display. Additionally, in Menu mode, only those menus which

can be set with NAVITRA are displayed.

■ APRS Lock <APRS LOCK>

This function prevents accidentally changing the built-in data

band frequency or accidentally transmitting on the data band

by pressing [PTT].

The “APRSLOCK” appears when APRS lock is activated.

[FREQUENCY]: The frequency of the built-in data band

cannot be changed.

(You also cannot perform Scan with [CALL], [VFO], [MR],

[MHz], or the Tuning control.)

[FREQUENCY & PTT]: The frequency of the built-in data

band cannot be changed. You cannot transmit on the data

band by pressing [PTT].

[FREQUENCY & TNC]: The frequency of the built-in data

band cannot be changed. While in APRS mode, pressing

[TNC] will not exit APRS mode.

[FREQUENCY & PTT & TNC]:

The frequency of the built-in

data band cannot be changed. You cannot transmit on the

data band by pressing [PTT]. While in APRS mode, pressing

[TNC] will not exit APRS mode.

• When the data band is set as the cross band, both band

frequencies cannot be changed and you cannot transmit using

[PTT].

• During APRS lock, you cannot change the CTCSS/DCS setting

of the data band.

• During APRS lock, you cannot change the DUAL setting of the

non-data band.

[OFF]: Changes the internal Data Band frequency so that

you can transmit on the internal Data Band by pressing

[PTT].

Not-yet-read

indicator

Time/ Date < before today >

(message received)

Sequence

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info