Bedienungsanleitung Kenwood TM-D710GA (Seite 54 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-9

SETTING INTERNAL TNC

Enter Menu mode and access Menu 601.

■ Data Band <DATA BAND>

On this transceiver you can select data band for APRS mode

independent of the selection for Packet mode. Select band

A or B as the data band for receiving or transmitting APRS

packets. The default is band A. “

” indicates the current data

band.

Note: In Menu 601, the selection switches among A-BAND, B-BAND,

TX:A-BAND RX:B-BAND, and RX:A-BAND TX:B-BAND. Select TX:A-BAND

RX:B-BAND or RX:A-BAND TX:B-BAND if APRS networks which use two

separate frequencies become available in the future.

■ Packet Transfer Rate <DATA SPEED>

The default APRS packet transfer rate set on the built-in TNC

is 1200 bps which is the standard among the current APRS

networks. If APRS networks which use 9600 bps transfer rate

become available in the future, select “9600 bps”

■ DCD Sense <DCD SENSE>

You can also select the method for inhibiting the built-in TNC

from transmitting.

[D or RxD BAND]: When the data band is no longer busy (as

per the steps below), the packet is transmitted.

a Press [PTT] to enter transmit mode.

b The data band is busy.

[BOTH BAND]: When the bands are no longer busy (as per

the steps below), the packet is transmitted.

a Press [PTT] to enter transmit mode.

b The data band is busy.

c The other band is busy.

[IGNORE DCD]: Transmission from the built-in TNC is not

inhibited. The packet is transmitted immediately.

■ TX delay <TX DELAY>

This function allows you to set a transmission delay time

between transmitting the APRS data and transmitting a ﬂ ag

code prior to the APRS data. When the other station has

activated their Save Mode, set a longer delay time.

SETTING GPS PORT

Enter Menu mode and access Menu 602

■ Baud Rate <BAUD RATE>

Set the communication speed of the external GPS or other

equipment that is connected to the GPS terminal. The speed

is set to 4800 bps (NMEA)/ 9600 bps (IPS format: SONY)

when a GPS receiver is connected.

• It does not correspond to the Gamin-TXT format.

■ Input Type <INPUT>

[OFF]: You can perform APRS communications without

the use of a GPS receiver or Weather Station. Set your

station position data manually through Menu No. 605 (MY

POSITION).

[GPS]: You can perform APRS communications using a GPS

receiver. Verify your station position data by pressing the

[POS] key.

[WEATHER (Davis)]: You can perform APRS

communications using a Davis Weather Station. Verify your

station weather data by pressing the [WXi] key.

• Operation veriﬁ cation model (as of October 2013)

Vantage PRO2

• Please use the Data Logger bundled with “WeatherLink

for Vantage Pro2

, Windows, Serial Port” (Davis Part

No.06510SER) or “WeatherLink

for APRS, with Streaming Data

Logger” (Davis Part No.06540) with Vantage PRO2

• When using the “WeatherLink

for APRS, with Streaming Data

Logger” (Davis Part No.06540) Data Logger, set the BAUD RATE

(Menu No.602) to 9600bps for stable operation.

[WEATHER (PeetBros. )]: You can perform APRS

communications using a PeetBros Weather Station. Verify

your station weather data by pressing the [WXi] key.

• Operation veriﬁ cation model (as of October 2013)

ULTIMETER

2100 (Packet mode)

■ Output Type <OUTPUT>

[WAYPOINT]: Waypoint information is forwarded. The callsign

and positioning data received from another station can be

displayed as the waypoint data through the device connected

to your GPS receiver or on the GPS receiver display.

[DGPS]: Differential GPS information is forwarded. The

differential information which is received in the beacon from a

reference station (amateur radio station), is sent to the GPS

receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info